Audited Supplier
Main Features for SINOWAY SWD80 Agriculture Bulldozer
The machine adopts the LR4A3Z-22 diesel engine, which is featured with a big power reserve, strong output power and low specific fuel consumption.
Gearbox is applied to 4F plus 2R mechanical shift, which is suitable for several kinds of environment.
Integral trolley traveling construction adopting rigid chassis and semi-rigid hemger.
The advanced control system is equipped to turn around with full hydraulic, with flexible and laborsaving operation.
Driver's cab is welded with profile steel, with high strength, resistant against impact and good protection performance.
The bulldozer is applicable for construction in narrow ground, which is flexible and high in its operation efficiency.
The machine adopts the YTO LR4A3Z-22 diesel engine, which is featured with a big power reserve, strong output power and low specific fuel consumption.
Gearbox is applied to 4F plus 2R mechanical shift, which is suitable for several kinds of environment.
Integral trolley traveling construction adopting rigid chassis and semi-rigid hemger.
The advanced control system is equipped to turn around with full hydraulic, with flexible and laborsaving operation.
Driver's cab is welded with profile steel, with high strength, resistant against impact and good protection performance.
The bulldozer is applicable for construction in narrow ground, which is flexible and high in its operation efficiency.
Product Show
| Engine | |
| Model | YTO |
| Type | Four-cylinder,water-cooled turbocharged,mechanical injection |
| Rated power | 60KW |
| Rated speed | 2200rpm |
| Implement Hydraulic System | |
| Hydraulic flow rate | 110L/min |
| Hydraulic pressure | 16MPa |
| Pump type | Gear pump |
| Control valve | Hand operated |
| Under Carriage System | |
| Sprocket | Integral |
| Number of track rollers (each side) | 5 |
| Number of carrier rollers (each side) | (3 single, 2 double) |
| Number of front idler (each side) | 11 |
| Track type | Single grouser |
| Track tension | Hydraulic |
| Track pitch | 154mm |
| Track width | 400mm |
| Number of track shoes (each side) | 39 |
| Track length on ground | 1960mm |
| Ground clearance | 350mm |
| Main Technical Specification | |
| Operating weight(without ripper) | 8700Kg |
| Ground pressure(without ripper) | 0.051MPa |
| Grade ability | 58% |
| Overall dimensions (L×W×H,without ripper) | 4200×2544×2934mm |
| Max. tractive force | 66KN |
| Working Equipment | |
| Blade type | Straight |
| Width | 2544mm |
| Height | 880mm |
| Max. digging depth | 357mm |
| Max. lift above ground | 784mm |
| Tilting angle | 10° |
| Blade capacity | 3m3 |
| Transmission System | |
| Gear box | Mechanical |
| Bevel gear | One pair spiral bevel gear |
| Final drive | One pair columnar gear floating sealing |
| Gear shifts(Forward/Reverse)Travelling speed(km/h) | F4/R2 |
| Forward/Reverse I | 2.4~10.4 |
| Forward/Reverse II | 4.9~8.9 |
| Service Capacities | |
| Fuel tank | 100L |
| Water tank | 22L |
| Implement oil tank | 29L |
| Steering clutch | Dry multi-plate, floating control |
| Steering brake | Mechanical pedal control |
Producion Line
Why Choose Us
