Audited Supplier
Magnesia Brick is made of dense burned-out magnesium oxide, has good fire resistance, corrosion resistance, and is widely used in the inspection room of glass jars, lime kilns, non-ferrous metallurgical furnaces, open furnaces, iron stirrers and electric arc furnaces . Magnesia brick is an alkaline refractory material, which has a strong resistance to alkali slag, but can not resist the erosion of acid slag. At a high temperature of 1600°C, it can react with silica bricks, clay bricks and even high alumina bricks. On the heating furnace and the soaking furnace, they are mainly used for laying the surface layer of the furnace bottom and the bottom of the soaking furnace wall, which can resist the corrosion of scale.
Magnesia Brick is mainly used for furnace lining, furnace bottom and furnace wall, oxygen converter permanent lining, non-ferrous metal smelting furnace, high temperature tunnel kiln, calcined magnesia and cement rotary kiln lining, furnace bottom and furnace wall, glass furnace regenerative lattice Bricks, etc
Brand Properties | MD92 | MD95 | MD97 | MD98 | |
Bulk density(g/cm3) | 2.90 | 2.95 | 3.00 | 3.00 | |
Refractoriness under load T2 (ºC) | 1550 | 1650 | 1700 | 1700 | |
Apparent Porosity (%) | 18 | 16 | 15 | 15 | |
Cold Crushing Strength(MPa) | 55 | 60 | 70 | 80 | |
Thermal shock resistance 950deg air cool (times) | 10 | 10 | 10 | 10 | |
Composition(%) | MGO | 92 | 95 | 97 | 97.5 |
CaO | 2.5 | 2.0 | 1.6 | 1.2 | |
SiO2 | 3.5 | 2.5 | 1.2 | 0.6 | |
Q1 : How can you control your quality?
A1 : For each production processing, we have complete QC system for the chemical composition and Physical properties. After production, all the goods will be tested, and the quality certificate will be shipped along with goods.
Q2 : What is your lead time?
A2 : It usually needs about 15- 20 days after receiving the PO.
Q3 : Do you provide free samples?
A3 : Yes, free samples are available, generlly speaking, the buyer shall bear all the delivery cost.
Q4 : What is your payments terms?
A4 : We can accept 30% deposit, 70% balance to be against the BL copy or by LC, or other payment terms.
Q5 : Can we visit your company?
A5 : Yes, for sure, you are welcome to visit JUCOS company.
Q6 : What standards do you have?
A6 : Our products meet the standards, such as ASTM, ASME, AMS, DIN, JIS etc.
The third party testing is all available for us.
