Audited Supplier
XJ150/250/350/450/550
1 Year
1 Year
ISO 9001:2008
New
DC Motor
250-300mm
>300m
Cone Bit
Rotary
2000m
19
3200
Bulk
steel
Puyang Henan China
84304129
Product Description
XJ150/30t/40t workover single drum rig is designed and manufactured according to the principle " advanced performance, reliable operation, convenient mobilization, economic operation and meeting HSE requirement ". The performance and quality has reached or are beyond the advanced level of international similar workover rigs and confirming all the related APIs.Hydraulic system
Function: hydraulic system is used for Leveling jacks, mast raising oil tank, mast telescoping oil tank, workover hydraulic clamp.
Air system
The pneumatic system mainly consists of air supply system, engine throttle control system and drawworks air control system. air supply system adopt gas source of vehicle and equipped with FRL Combination.
Air control valve of main drum is installed in the operation room and used to control clutch of main drum, operation room is equipped with control valve of main drum, drawworks emergency braking valve, crash-proof reset valve,
Electrical system
Lamps circuit for chassis: 24v
Install side marker light according to GB4785, GB7258 and other compelling standard requirements.
1 direct current 24 v light for collar is supplied.
| No | Model | XJ150/40T | XJ250/70T | XJ350/90T | XJ450/110T | XJ550/135T | XJ650/160T |
| 1 | Power HP | 150 | 250 | 350 | 450 | 550 | 650 |
| 2 | Rated load T | 30 | 50 | 60 | 80 | 100 | 120 |
| 3 | Max. load T | 40 | 70 | 90 | 110 | 135 | 160 |
| 4 | Mast height ft | 59/69 | 69 | 95/102 | 102/108/115 | 118/125 | |
| 5 | Nominal small workover depth m | 2600 | 3200 | 4000 | 5500 | 7000 | 8500 |
| 6 | Large workover depth m | ------- | 2000 | 3200 | 4500 | 5800 | 7000 |
| 7 | Wireline diameter mm | 19/22 | 22 | 1"(26) 29 | |||
| 8 | Drive type | 6*4/8*4 | 6*6 | 8*8 | 10*8 | 10*8/12*8 | 12*8 |
| 9 | Traveling system | 3×4 | 4×5 | 3×4 | 4×5 | 4×5 | 4×5 |
| 10 | Drawworks | JC08 | JC12 | JC18 | JC21 | JC21/11 | JC21/11 |
| 11 | Work platform | Platform area 4m×2.9 m Adjustable height range of platform: 1.2m-2.7m | ------------------------ | ||||
| 12 | Substructure | ------------------------ | height :4.5m/5/6 area (L×W):5m×5.8m/7m | ||||
| 13 | Rotary table | ------------------------ | ZP-175/205/215/275 | ||||
| 13 | Self supporting system | No guy line anti-roll device and monitor | The self supporting system is composed of the rig's stable leg, anti-tilting instrument and internal guyline system. it no need outside guyline when it works. | ||||
