Audited Supplier
The term 'stainless steel plate' encompasses both stainless steel and acid-resistant steel plates. Emerging at the dawn of the 20th century, this material has been pivotal in propelling modern industry and technological advancements. Stainless steel plates come in various types with unique properties, evolving into several distinguished categories over time. Structurally, they fall into four main categories: austenitic, martensitic (including precipitation hardening), ferritic, and austenitic-ferritic duplex stainless steel plates. Chemically, they are classified based on key elements: chromium, chromium-nickel, chromium-nickel-molybdenum, low carbon, high molybdenum, and high purity stainless steel plates. Performance-wise, they are tailored for corrosion resistance, sulfuric acid resistance, pitting resistance, stress corrosion resistance, and high strength. Functionally, they cater to low temperature, non-magnetic, easy cutting, and super plastic applications. The common classification blends structural and chemical characteristics, grouping them into martensitic, ferritic, austenitic, duplex, and precipitation hardening types or chromium and nickel stainless steel categories. Typical applications include pulp and paper equipment, heat exchangers, mechanical and dyeing equipment, film washing apparatus, pipelines, and coastal construction materials.
According to the composition, it can be divided into Cr series (400 series), Cr-Ni series (300 series), Cr-Mn-Ni (200 series), heat-resistant chromium alloy steel (500 series) and precipitation hardening series (600 series).
200 series: chromium-manganese-nickel
201,202, etc.: manganese replaces nickel, corrosion resistance is relatively poor, widely used as a cheap substitute for 300 series in China
300 series: chromium-nickel austenitic stainless steel
301: good ductility, used for molded products. It can also be hardened quickly by mechanical processing. Good weldability. Wear resistance and fatigue strength are better than 304 stainless steel.
304: General model; that is, 18/8 stainless steel. Products such as: corrosion-resistant containers, tableware, furniture, railings, medical equipment. The standard composition is 18% chromium plus 8% nickel. It is a non-magnetic stainless steel whose metallographic structure cannot be changed by heat treatment. The GB grade is 06Cr19Ni10.
316 L: Low carbon, more corrosion resistant, easy to heat treat, products such as: chemical processing equipment, nuclear power generators, refrigerant storage tanks.
321: Except for the addition of titanium to reduce the risk of material weld corrosion, other properties are similar to 304.
400 series: ferritic and martensitic stainless steel, manganese-free, can replace 304 stainless steel to a certain extent
430: ferritic stainless steel, decorative, such as for automotive accessories. Good formability, but poor temperature resistance and corrosion resistance.
Product name | ASTM AISI Cold/Hot Rolled ASTM 201 202 310S 316L 321 304 430 Ss Stainless Steel Plate with 2b/Ba/8K/Mirror/Embossed/Checkered/Anti-Fingerprint/Perforated | |||
| Mode | 201 202 310S 316L 321 304 430 | |||
| Rd &Material | ASTM A240 Standard | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 430 904L | ||
| ASTM A480 Standard | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |||
| JIS 4304-2005 Standard | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |||
| JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2,SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A | |||
| Finish | 2b, BA, No. 4, 8K, hairline, embossed, etched, vibration, PVD color coated, titanium, sand blasted, anti-fingerprint | |||
| Production technology | 1. Round steel preparation; 2. Heat; 3. Hot rolling perforation; 4. Cut the head; 5. Pickling; 6. Grinding; 7. Lubricate; 8. Cold rolling processing; 9. Degreasing; 10. Solution heat treatment; 11. Straightening; 12. Cut the tube; 13. Pickling; 14. Inspection of finished products. | |||
| Typical uses | Seawater equipment, chemicals, dyes, papermaking, oxalic acid, fertilizer and other production equipment; Photography, food industry, coastal facilities, ropes, CD rods, bolts, nuts. | |||
| Thickness | 1. Thin plate (0.2mm-4mm) 2. Middle plate (3mm-30mm) 3. Thick plate (4mm-60mm) 4. Extra thick plate (60-115mm) as customer's requirement | |||
Size | as customer's requirement | |||
| Density | 7.98 g/cm³ | |||
| 201 Chemical element content (%) | ||||||||
| element | C | Si | Mn | P | S | Cr | Ni | N |
| Min | - | - | 5.5 | - | - | 16 | 3.5 | - |
| Max | 0.15 | 1 | 7.5 | 0.06 | 0.03 | 18 | 5.5 | 0.25 |
| 202 Chemical element content (%) | ||||||||
| element | C | Si | Mn | P | S | Cr | Ni | N |
| Min | - | - | 7.5 | - | - | 17 | 4 | 0.05 |
| Max | 0.15 | 1 | 10 | 0.05 | 0.03 | 19 | 6 | 0.25 |
| 310S Chemical element content (%) | |||||||
| element | C | Si | Mn | P | S | Cr | Ni |
| Min | - | - | - | - | - | 24 | 19 |
| Max | 0.08 | 1 | 2 | 0.045 | 0.03 | 26 | 22 |
| 316L Chemical element content (%) | ||||||||
| element | C | Si | Mn | P | S | Cr | Ni | Mo |
| Min | - | - | - | - | - | 16 | 10 | 2 |
| Max | 0.03 | 1 | 2 | 0.045 | 0.03 | 18 | 14 | 3 |
| 304 Chemical element content (%) | |||||||
| element | C | Si | Mn | P | S | Cr | Ni |
| Min | - | - | - | - | - | 18 | 8 |
| Max | 0.08 | 1 | 2 | 0.045 | 0.03 | 20 | 11 |
| 321 Chemical element content (%) | ||||||||
| element | C | Si | Mn | P | S | Cr | Ni | more |
| Min | - | - | - | - | - | 17 | 9 | Ti :5C~0.70 |
| Max | 0.08 | 1 | 2 | 0.045 | 0.03 | 19 | 12 | |
| 430 Chemical element content (%) | ||||||
| element | C | Si | Mn | P | S | Cr |
| Min | - | - | - | - | - | 16 |
| Max | 0.12 | 1 | 1 | 0.04 | 0.03 | 18 |
Our Advantages
Qualitative Materials:
We utilize top-grade raw materials to ensure our products boast superior strength, resilience, and exceptional longevity.
Advanced Technology:
Our manufacturing processes leverage state-of-the-art technology, encompassing advanced smelting, continuous casting, and cutting-edge rolling techniques.
Customized Service:
We offer bespoke design and manufacturing services, meticulously tailored to meet your specific needs and requirements.
FAQ
Q1: Why choose your company?
A: With over 16 years of industry expertise and a dedicated in-house factory, we provide unparalleled services supported by a professional and committed sales team.
Q2: What are your terms of payment?
A: Our payment terms consist of a 30% T/T upfront deposit, with the remaining 70% due prior to delivery.
Q3: What are your delivery terms?
A: We offer delivery under the terms of FOB, CFR, CIF, and EXW.
Q4: What is your delivery time?
A: Our standard lead time ranges from 7 to 15 days following receipt of the deposit.
Q5: Can you provide samples?
A: Yes, we provide free samples if they are available in stock. However, the transportation fee must be borne by the buyer.Certification
