Audited Supplier
ASTM Cold Rolled G550 S350gd MS Plate Coil Z275 Zm310 Zm430 Decoiling Zn-Al-Mg Corrugated Coated Zinc Aluminum Magnesium Alloy PPGI Steel Sheet PV Solar Support
Magnesium Aluminum Zinc Alloys are a common type of heat-treatable commercial alloy often used in structural components and metallurgical coatings due to their light weight and high resistance to corrosion. American Elements manufactures magnesium aluminum zinc in varying ratios such as high magnesium (96% Mg, 3% Al, 1% Zn (magnesium AZ31B), and 93% Mg 6% Al, 1% Zn (magnesium AZ61A), high aluminum (0.7-3.4% Mg, 0.8-8.2% Zn, balance Al), or high zinc (93.5% Zn, 3.5% Al, 3% Mg), in addition to custom compositions. Magnesium aluminum zinc is available in a number of different forms, including foils, rods, and other shapes in a range of sizes and dimensions. Magnesium aluminum zinc alloy is generally immediately available in most volumes, including bulk quantities. American Elements can produce most materials in high purity and ultra high purity (up to 99.99999%) forms and follows applicable ASTM testing standards; a range of grades are available including Mil Spec (military grade), ACS, Reagent and Technical Grade, Food, Agricultural and Pharmaceutical Grade, Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia).
Aluminum Sheet | |
1)1000 Series Alloy (Generally called commercial pure aluminum,AI>99.0%) | |
Alloy | 1050 1050A1060 1070 1100 |
Temper | O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/H36 H18/H28/H38 H114/H194, etc. |
Specification | Thickness<30mm; Width<2600mm; Length<16000mm OR Coil (C) |
Application | Lid Stock. Industrial Device, Storage. All Kinds of Containers, etc. |
Feature | Lid Shigh conductivity, good corrosion resistant performance, high latent heatof melting, high-reflectance, well welding property*, low strength, and notsuitable for heat treatments. |
2)3000 Series Alloy (Generally called Al-Mn Alloy, Mn is used as main alloy element) | |
Alloy | 3003 3004 3005 3102 3105 |
Temper | O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/H36 H18/H28/H38 H114/H194, etc. |
Specification | Width<2200mm Length<12000mm OR Coil (C) |
Application | Decoration, heat-sink device, external walls, storage, sheets for construction, etc. |
Feature | Good rust resistance, not suitable for heat treatments, good corrosion resistantperformance, well welding property, good plasticity, low strength but suitablefor cold working hardening |
3)5000 Series Alloy (Generally called Al-Mg Alloy, the Mg is used as main alloy element) | |
Alloy | 5005 5052 5083 5086 5182 5754 5154 5454 5A05 5A06 |
Temper | O/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34H16/H26/H36 H18/H28/H38 H114/H194, etc. |
Specification | Thickness<170mm; Width<2200mm ; Length<12000mm |
Application | Marine Grade Plate, Ring-Pull Can End Stock, Ring-Pull Stock. AutomobileBody Sheets, Automobile Inside Board. The Protective Cover On Engine. |
Feature | All the advantages of normal aluminium alloy, high tensile strength & yield strength,good corrosion resistant performance, well welding property, well fatigue strength.and suitable for anodic oxidation. |
4)6000 Series Alloy (Generally called Al-Mg-Si Alloy, the Mg and Si are used as main alloy elements ) | |
Alloy | 6061 6063 6082 |
Temper | O F, etc. |
Specification | Thickness<170mm; Width<2200mm ; Length<12000mm |
Application | Automotive, Aluminium For Aviation, Industrial Mould. Mechanical Components,Transport Ship. Semiconductor Equipments, etc |
Feature | Good corrosion resistant performance, well welding property, good oxldability.easy to spray-finishing, well oxidation coloring, good machinability. |
Chemical Composition (For Reference) (Common steel grade of aluminum) | |||||||||
Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al: Min. |
1050 | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | - | 0.05 | 0.03 | 99.50 |
1050A | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | - | 0.07 | 0.05 | 99.50 |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | 0.05 | 0.03 | 99.60 |
1100 | 0.95 Si+Fe | 0.05~0.20 | 0.05 | - | - | 0.10 | - | 99.0 | |
2014 | 0.5~1.2 | 0.70 | 3.9~5.0 | 0.4~1.2 | 0.2~0.8 | 0.10 | 0.25 | 0.15 | remainder |
2017 | 0.2~0.8 | 0.70 | 3.5~4.5 | 0.4~1.0 | 0.4~0.8 | 0.10 | 0.25 | 0.15 | 91.5-95.5 |
2024 | 0.50 | 0.50 | 3.8~4.9 | 0.3~0.9 | 1.2~1.8 | 0.10 | 0.25 | 0.15 | remainder |
3003 | 0.60 | 0.70 | 0.05~0.20 | 1.0~1.5 | - | - | 0.10 | - | remainder |
3004 | 0.30 | 0.70 | 0.25 | 1.0~1.5 | 0.8~1.3 | - | 0.25 | - | remainder |
3005 | 0.60 | 0.70 | 0.30 | 1.0~1.5 | 0.2~0.6 | 0.10 | 0.25 | 0.10 | remainder |
3105 | 0.60 | 0.70 | 0.30 | 0.3~0.8 | 0.2~0.8 | 0.20 | 0.40 | 0.10 | remainder |
5005 | 0.30 | 0.70 | 0.20 | 0.20 | 0.5~1.1 | 0.10 | 0.25 | - | remainder |
5052 | 0.25 | 0.40 | 0.10 | 0.10 | 2.2~2.8 | 0.15~0.35 | 0.10 | - | remainder |
5754 | 0.40 | 0.40 | 0.10 | 0.50 | 2.6~3.6 | 0.30 | 0.20 | 0.15 | remainder |
5083 | 0.40 | 0.40 | 0.10 | 0.4~1.0 | 4.0~4.9 | 0.05~0.25 | 0.25 | 0.15 | remainder |
6061 | 0.40~0.8 | 0.70 | 0.15~0.4 | 0.15 | 0.8~1.2 | 0.04~0.35 | 0.25 | 0.15 | remainder |
6082 | 0.70~1.3 | 0.50 | 0.10 | 0.4~1.0 | 0.6~1.2 | 0.25 | 0.20 | 0.10 | remainder |
7075 | 0.40 | 0.50 | 1.2~2.0 | 0.30 | 2.1~2.9 | 0.18~0.28 | 5.1~6.1 | 0.20 | remainder |
Recommend Products
About us
Packing & Shipping
Certificates
Customer Voice
FAQ
1.What kind of work does your company do?
Our company is a professional manufacturer.
We mainly produces stainless steel plate/pipe/coil/lead round bars,as well as galvanized plate/pipe/coil/lead wire/corrugated sheet,etc.
2.Do you provide free samples?
Yes, we can provide free sample for testing,buyer should bear all the shipping costs.
3.How long is your delivery time?
Generally it is 3-7 days if the goods are in stock or it is 7-15 days if the goods are not in stock, it is according to quantity.
4.How can we guarantee quality?
Always a pre-production sample before mass production;always final Inspection before shipment.
5.Why should you buy from us not from other suppliers?
Diversified products, direct supply from manufacturer.
6.What is your terms of payment ?
We accept T/T ,L/C ,Western union, paypal ,Credit Insurance Order etc.
The payment method can be negotiated by both parties according to the actual situation.
