Audited Supplier
HPT High Strain Dynamic Pile Tester
Application
Used for testing the pile loading capacity by dynamic method
Standard
ASTM D4945-00 Standard Test Method for High Strain Dynamic Testing of Piles
Feature
Sampling frequency is Optional of 10 kHz, 20 kHz, 30 kHz and 40 kHz.
Sampling points are optional of 1024, 2048 and 4096. Maximum sampling time is up to 400 ms
Before test the two accelerometers and two strain transducers are self-checked automatically, determine whether the system is in normal state.
Automatically check the static strain deviation of the strain transducer during installation and adjusted to zero before blow.
During test every blow can be saved automatically
Built-in lithium battery can be used more than 5 hours continuously.
RCAPWAP program carry on match analysis automatically or manually.
Specification
| Name | QTY |
| Main Controller | 1 |
| PE Accelerometer (lmport from America) | 2 |
| Strain gauge(Range 2000) | 2 |
| One-to-four cable | 1 |
| Main Cable(30m) | 1 |
| U disk(PDAR software,RCAPWAP software and Users Manuals) | 1 |
LPT Low Strain Dynamic Pile Tester
Application
Used for testing the pile integrity and detecting the defect position by dynamic method
Standard
ASTM D5882 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
| Main controller size | 225*172*62mm |
| Main controller weight | 2.0kg |
| Accelerometer | Sensitivity:100mV/g |
| Frequency | 0.5-10000Hz |
| Waterproof | IP68 |
| Working temperature | -54ºC~+121ºC |
Application
Used for testing the pile loading capacity and the pile integrity and detecting the defect position by dynamic method
Standard
ASTM D4945-00
ASTM D5882
Specification
| Size | 225* 172* 62mm |
| Weight | 2.0kg |
| Display | With 24bit high precision 8" touchscreen and high brightness colorful LCD. |
| HPT Accelerometer | PE Accelerometer, imported from America |
| LPT Accelerometer | Imported from America |
| Sensitivity | 100mV/g |
| Frequency | 0.5~10000Hz |
| Strain gauge | Range 2000 |
| Data | Can save up to 10k measured curve, export through USB |
| Power | Li battery, can work more than 6hours continuously |
Application
Used for testing the pile integrity and detecting the defect position by dynamic method
Standard
ASTM D5882 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
Feature
Screen:8''LCD touchscreen
Accelerometer:0.5~10000Hz accelerometer
Software:LPTR,without key
Specification
| Screen | 8''LCD touchscreen |
| Accelerometer | 0.5~10000Hz accelerometer |
| Software | LPTR,without key |
SLPT Automatic Static Load Pile Tester
Application
Used for testing the pile loading capacity by static method
ASTM D1143
ASTM D3689
| Main Controller | Wired,Wireless |
| Control Box | 6channels/12channels |
| Displacement Sensor | Range 50mm,0.01mm,waterproof |
| Oil Pressure Sensor | 80MPa,0.25%FS |
| Wireless Antenna | 3m cable,2pcs,signal up to 1000m |
| Wired Communication Cable | 30m |
| JZA-R Analysis Software | single-cycle or multi-cycle |
