Audited Supplier
DRX-I-PB Guarded hot Plate Thermal Resistance Thermal Conductivity Meter
The thermal conductivity tester is based on heat flow meter and guarded hot plate method. It is mainly used to test the thermal conductivity, thermal resistance of insulation materials, glass, fiber, foam and so on. Testing materials include fiber board, loosing filler glass fiber, ceramic fiber, foam plastic (XPS/EPS/PUR, etc.), inter-layer composite plate, vacuum plate, cement(concrete) products, glass rock wool, filler materials, gypsum board and so on. DRX coefficient of heat conductivity measurements conform to ISO 8301, JIS b 1412, DIN EN 12939, ASTM C518 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation and relevant international standards. It is in full compliance with the national thermal conductivity measurement standard with its stable and accurate temperature control technology, computer interface, software's real-time monitoring and control, data processing and saving connecting. With these advantages, it is applied widely in materials properties detection organization, scientific research institution, quality detection department of factory, institutions of higher education teaching and research.
Main features:
- Fully insulated test chamber to avoid external influences
- Compensation for test piece's thickness and the average temperature.
- External cooling with tap water or recirculation cooler for different temperature ranges
- Electrically operated plate lifting mechanism
- Automatic measurement of sample thickness
- Equipped with an integrated Single Board Computer (SBC) with 32 GB SSD
- 10.1" color touch-screen
- Interface: USB or RS232 connect to the additional PC installed with the thermal conductivity coefficient testing software
Main technical parameter:
| Thermal conductivity range(λ) | 0.001 ~ 3 W/m.K |
| Cooling system | External water bath |
| Hot plate temperature | RT~99.99ºC |
| Cold plate temperature | 0°C~ 60 ºC ± 0.1°C thermostatic control with high precision digital display temperature instrument |
| Cold, hot plate temperature difference | 20ºC |
| Temperature accuracy/resolution | 0.1ºC/0.01ºC |
| Sample size(Max) | 300×300×(5-50) mm |
| Automatic thickness measurement | High-precision displacement sensor is used and connected with computer to measure thickness automatically; resolution 0.01mm. |
| Thermal resistance range (r-value) | 0.1 ~ 8.0 m2K/W |
| Repeatability | ±1% |
| Accuracy | ±3% |
| Environmental condition | room temperature: 18~25ºC, humidity: 20~80%RH |
| Data result analysis | Automatic thermal analysis software, Windows 10/7/XP, English |
| Supply voltage | AC 220V±5%, power: 3.0kw |
| Product list: | DRX-I-PB Test host with touch screen system, Accurate thermostatic cooling bath, Testing software, *Calibration standard sample(optional) |
