Audited Supplier
Factory Disposable Syringe Production Line/ Syringe Turnkey 1- 50ml Syringe Making Machine /Syringe/Needle Production Making Assembly Line
The automatic syringe assembly machine is specially designed for the production of medical syringes. The whole process is highly automated. Touch screen PLC operation panel with automatic finished product counting system, the machine is easy to operate and has high efficiency, low noise, stable running. It meets the requirements for all kinds of syringe production.
Machines of these are with various types 1 ,2 ,3 ,5 ,10 ,20ml, and many products, such as popular type, screw thread, twin set, inclined needle etc. are all could be assembled with this machine.
Our Syringe Assembling Machine adopts LCD display to display the feeding speed, and can adjust the assembly speed separately, with electronic counting. High efficiency, low power consumption, easy maintenance, stable operation, low noise, suitable for the GMP workshop.
Product Features
1.AUTOMATIC OPERATION
Automatically stop for lack of material, automatically open for adding of material.
2. .QUALITY COMPONENT
Our syringe assembling machine consists of high-quality feeding system and assembly mechanism.
3.FEEDING SYSTEM
It feeds 4 components of syringe (plunger/ stopper/ needle/ barrel) to the assembly mechanism.
It completes assemble plunger with rubber stopper, assemble barrel with needle, assemble plunger with stopper and barrel with needle.
5.EXCELLENT PERFORMANCE
Greatly improve pass rate and production quality. We always pursue the endless improvement of our machinery and project quality.
6.AFTER-SALES SERVICE
Make a response within 2 hours after receiving the buyer's equipment failure notification of service requirement.
Product Display
1.It uses LCD display to show the feeding speed, and can adjust the assembly speed separately with electronic counting.
2.It can produce all kinds of SPEC syringes, including middle head direct
insert type & two-piece set syringes. .
3.
With touch screen control system, no injection silicon oil or plugging needle can be inspected.
4.It is suitable for the GMP workshop, high efficiency, low power consumption, easy maintenance, stable performance.
1. Product specifications: 1cc, 2cc, 3cc, 5cc, 10cc, 20cc, 30cc, 50cc
2. Production Capacity: 15000 pcs/hour according to 5cc design under normal production conditions;
3. Machine dimensions: 4800x2300x2200 (mm);
4. Personnel: 1 operator/set;
5. Feeding method: silo material extraction, automatic centrifugal cutting, automatic material control without material;
6. Design life should not be less than 8 years (excluding spare parts manufacturing life). During continuous operation, the equipment should be regularly maintained to ensure the life of the equipment;
7. The total power of the machine: 2.5kw, the input power can be adjusted accordingly.
8. Weight: 1500kg;
| Assembling range | 1ml | 2-3ml | 5ml | 10ml | 20ml |
| Assembling speed | 350-400pcs/min | 350-400pcs/min | 350-400pcs/min | 350-400pcs/min | 250-300pcs/min |
| Input | 220V50HZ | ||||
| Machine size | 700X400X210cm | ||||
| Power | 3kw | ||||
| Weight | 1800kg | ||||
| Air pressure | 0.2-0.4MPa | ||||
ABOUT US
