Audited Supplier
| Item | Description | |
| Wireless parameters | Wireless communication | Support ZigBee PRO 2007 standard; multiple network topologies, fast, reliable and safe. |
| Theoretical bandwidth | 153.6Kbps | |
| Transmission power | ≤10dBm | |
| Receiver sensitivity | ≤-104dBm | |
| Hardware system | CPU | Industrial-grade 32-bit microprocessor |
| FLASH | 2MB (Can store 68 days of historical DynamicGraphics, collected by 2 hours per DynamicGraphics on 1 oil well ) (expandable to 8MB) | |
| Indicator system | POWER | Power indicator (red light, always on when power on) |
| ZigBee | Wireless ZigBee communication indicator (red and green lights, the red light is on when data is received, and the green light is on when sending data) | |
| Link | Communication indicator light with host computer (red and green lights, red light on when receiving data, green light on when sending data) | |
| Interface Type | Serial port | 1 RS232 and 1 RS485 interface (built-in ESD protection), standard ModBus RTU protocol communication, can be connected to third-party PLC or data acquisition terminal and other equipment. The serial port parameters are as follows: Data bits: 8 bits Stop bit: 1 bit Check: No check Serial port rate: 19200 bits/s (can be set) For the communication protocol, please refer to: "SM5100 ZigBee DTU Communication Protocol V1.01" |
| Ethernet | Customized products for special requirement, ModBus TCP protocol communication. | |
| Antenna interface | Standard SMA female antenna interface, characteristic impedance 50 ohm | |
| Power Interface | Terminal interface with built-in power reverse protection | |
| Terminal definition | POWER | POWER and GND terminal |
| 485 | A and B terminal | |
| 232 | TXD, RXD and GND | |
| Ethernet port | RJ45(Not installed by default, need to be customized) | |
| Note: The physical wiring terminal diagram is as above, and there are specific terminal silk screens on the shell. | ||
| Power | Standard power supply | DC 12V/0.5A |
| Power supply range | DC 5~24V | |
| Power consumption | Working current | ≤200mA |
| Quiescent current | ≤50mA | |
| Physical characteristics | Housing metal | Protection grade IP30. The housing and the system are safely isolated, suitable for industrial control field applications |
| Dimensions | 91.5x58.5x25 mm (not including antenna and mounting parts) | |
| weight | 200g | |
| Others | Operating temperature | -40~+65ºC |
| Storage temperature | -40~+85ºC | |
| Relative humidity | 95% (no condensation) | |
Ningbo GEANTEC Electronic Co., Ltd., renowned as the overseas division of the illustrious SMNOON Technology Development Group, is a distinguished supplier specializing in oilfield IoT equipment, comprehensive weighing solutions, and precise force measurement. With an impressive legacy spanning 37 years, we are committed to innovation and excellence.
GEANTEC's Premier Offerings:
- Advanced Oil Well IoT solutions featuring state-of-the-art oilfield testing instruments, digital remote measuring and control systems, alongside portable diagnostic instruments, industrial RTUs, and automation control cabinets.
- Innovative Weighing Solutions, including high-precision load cells, sophisticated indicators, and comprehensive weighing systems designed for accuracy and reliability.
- Cutting-edge Force Measurement products such as force load cells, high-sensitivity pressure transducers, and precision angle transducers for optimal performance.
