Audited Supplier
GM-20/30
12 Months
CE
Flute Paper Package
Electric
Engineers Available to Service Machinery Overseas
Carton Packaging Machinery
Automatic
MAYKWA
20gp Container
3500kg-6000kg
China
8439300000
Product Description
Corrugated Paper Secondary glue Coating Machine
Main technical features:
(4) After the surface of the coating roller is quenched and tempered, the inner hole is processed, and the dynamic balance surface is finely ground and engraved with pit pattern. Large-diameter glue roller dynamic balance treatment, copper plate scraping glue, glue uniform, save glue, save steam, flat cardboard
(5) The drive of the gluing unit is directly connected by the frequency conversion motor through the reducer, and the frequency conversion control ensures that the linear speed of the gluing roller is synchronized with the double-sided machine, and can operate independently. Adopt angle sensor, PLC, touch screen man-machine interface display. According to different paper quality and different speed, the glue amount is automatically controlled, and the roller gap is automatically adjusted according to different corrugation types, without accumulating errors.
Technical parameter
Main technical features:
- Diameter of the glue roller is ¢268mm or ¢320mm. Independent variable frequency motor drive, PLC adjusts glue gap and man-machine interface.
- Secondary gluing machine is the corrugated paper conveyed by the overpass. After preheating and heating up, it is coated with glue again, and then it enters the double-sided machine for pasting and lamination to produce three-layer five-layer cardboard.
(4) After the surface of the coating roller is quenched and tempered, the inner hole is processed, and the dynamic balance surface is finely ground and engraved with pit pattern. Large-diameter glue roller dynamic balance treatment, copper plate scraping glue, glue uniform, save glue, save steam, flat cardboard
(5) The drive of the gluing unit is directly connected by the frequency conversion motor through the reducer, and the frequency conversion control ensures that the linear speed of the gluing roller is synchronized with the double-sided machine, and can operate independently. Adopt angle sensor, PLC, touch screen man-machine interface display. According to different paper quality and different speed, the glue amount is automatically controlled, and the roller gap is automatically adjusted according to different corrugation types, without accumulating errors.
Technical parameter
| Working width | 1200-2500mm |
| Design speed | 200m/min or 250m/min |
| Working speed | 80-120m/min |
| Glue volume adjustment range | 0.08-0.6mm |
| Number of meshes | 32 lines |
| Pre-heating temperature | 150-200ºC |
| Voltage | 220/380/440V 50/60hz 9KW |
| Air source | 0.4-0.9Mpa |
| Mode of pressure | Pneuatic mode |
