Advanced Suction Technology Dust Collector for Clean Spaces

Single-cylinder cyclone dust collector

 Cyclone dust collector, also known as centrifugal dust collector, is a kind of efficient and economical dust removal equipment, which is widely used in industrial fields. The following is a detailed introduction to cyclone dust collector:
1. Working Principle: Cyclone dust collector mainly uses the centrifugal force generated by the rotating airflow to separate the dust from the dusty gas. After the dusty gas enters the dust collector from the air inlet, it forms a spiral movement between the inner cylinder and the outer cylinder. Under the action of centrifugal force, the dust is thrown to the wall, and then slides down to the dust hopper under the action of gravity, and the purified gas is discharged from the inner cylinder.
2. Structural composition: cyclone dust collector is mainly composed of inlet pipe, exhaust pipe, cylinder, cone and dust hopper. Its structure is simple, easy to manufacture, install and maintain.
3. product features:
    - High-efficiency dust removal: cyclone dust collector has high dust removal efficiency for dense, non-fibrous and non-bonded dust, especially suitable for initial purification of high temperature flue gas.
    - Simple structure: no moving parts, easy to operate and maintain.
    - Low operating cost: low equipment investment and operating costs.
    - Strong applicability: it can be used in many industrial fields, such as mining, metallurgy, refractory materials, coal, chemical industry and electric power. There is no need to provide air pressure gas source at the construction site, and it covers a small area.
4. technical advantages:
    - Strong dust-cleaning ability: the conical barrel design reduces the possibility of short-circuiting dusty gas and improves the dust removal efficiency.
    - Low emission concentration: It has high capacity to capture dust with large specific gravity and coarse particles.
    - Low steel consumption: In the case of similar dust removal efficiency, the cyclone dust collector has lower steel consumption.
5. Scope of application: cyclone dust collector is not only suitable for high efficiency dust removal of dry dust, but also adapted to high temperature gas conditions below 400ºC, which can be used as the production link of material recovery, or the pre-flue gas purification equipment of layer-fired boiler.
In short, cyclone dust collector is widely used in the field of industrial dust removal with its high efficiency, economy and reliability.