Aereo Autosoportado Cables De Fibra Optica

 Description
 
 The loose tube are made of high modulus plastics(PBT), which are filled with water resistant gel.  Outer sheath  is  made of UV resistance PE jacket. Figure-8 self-supporting structure provide high tensile strength and enables easy and cost saving aerial installations. The FRP self-supporting member gives desirable tensile resistant and makes the cable to be All-dielectric construction which allows hanging on electric poles and power lines with up to 12KV.                                       
 
Feature 
 
1.FRP Self-supporting member  2.0mm in diameter.
2.Excellent mechanical and environmental performance.
3.Compact size and light weight, good choice for last mile FTTX project.
 
Application:

1.Adopted to Outdoor distribution.
2.Suitable for aerial install with power line up to 12KV.
3.Local area network communication.

Mechanical Performance :
Max Tension Performance  : IEC 60794-1-2-E
Max. Operation Tension     : IEC 60794-1-2-E1
Crush Test                        : IEC 6079 -1-2-E3
Impact Test                      : IEC 60794-1-2-E4
Repeated Bending              : IEC 60794-1-2-E6
Torsion Test                     : IEC 60794-1-2-E7
Cable bend                        : IEC 60794-1-2-E11A
Attenuation Coefficient       : ITU-T G.652
Structural Test                  : IEC-60793-1-20
Environmental Performance
Temperature Cycling         : IEC 60794-1-2-F1
Water Penetration             : IEC 60794-1-2-F5B
Filing Compound Flow      : IEC 60794-1-E14


Technical parameters