Audited Supplier
White
Liquid
Acrylic
Spray
Finish Coat
ISO14001, ISO9001
Film Forming Matter
Conversion Type
Drum or IBC Tank
Shandong Province China
390690
Product Description
Production Description
1- Product Induction
KH-1366 is a new generation, cost-effective special alkali-resistant primer emulsion developed by using high-quality additives and epoxy group functional monomers.
2-Features
Fine particle size, low surface tension, good permeability to substrate
It has obvious reinforcing effect on cement substrate
Excellent resistance to alkalis and salting out
Excellent adhesion
Good pigment and filler carrying capacity
3-Application
This product can be directly used for the back cover and sealing of all kinds of concrete structural surfaces, cement mortar surfaces and white cement putty leveling. Can also be used in a variety of solid color primers.
4-Technical Parameter
| Appearance | Milky white bluish liquid |
Solid Content % | 29~31% |
PH | 6.0~8.0 |
Viscosity(NDJ-1,No.3,60rpm,25ºC,mPa·s) | ≤200cps |
Minimum film forming temperature (MFT) (ºC) | 2ºC |
5-Package &Storage
Package 25KG 50KG 200KG plastic drum and IBC tank.
Storage
1-This product should be stored in a dry and ventilated room, avoid direct sunlight, and the storage temperature is 5 to 35 °C.
2-The effective storage period is 6 months from the date of packaging, If it exceeds the storage period, please re-test and use it only after passing the test.
3-It is recommended to dilute with deionized water. If you need to add powder, it is better to use non-ionic pigment wetting agent.
About Us
Shandong Kunhan New Material Technology Co., Ltd. was established in 2006 and is located in Linzi District, Zibo City, the ancient capital of Qi State. The company has a registered capital of 10 million yuan and covers an area of 20,000 square meters. It is a comprehensive modern high-tech enterprise integrating R&D, production and sales of water-based acrylic emulsions, water-based nano-coatings and new fluorine-containing materials. There is a set of acrylic emulsion production equipment with an annual production capacity of 50,000 tons, a set of multifunctional monomer equipment with an annual production capacity of 600 tons, and a R&D center. The company has 113 employees, including 32 R&D personnel, and more than 60% of the employees have a college degree or above.
