Audited Supplier
DACP for drilling fluid is a kind of heteroglycan cellulose derivative, which is prepared by optimizing a variety of natural plant gum and cellulose, through alkylation and other process modifications. It has the physical and chemical properties of heteroglycan and cellulose, and is an environment friendly drilling fluid additive with multiple functions such as filtration reduction, lubrication, inhibition, rheological adjustment, etc. The linear macromolecules composed of cyclic polyhydroxy molecular structural units make it perform better functions of filtration reduction, inhibition and lubrication in water-based drilling fluid.. The recommended dosage of DACP is 3.0- 5.0% (w/v). When DACP's dosage in water base drilling fluid reaches 10.0% (m/v), it has self-gel plugging effect.
| Item | Technical Indicators |
| Appearance | Yellow or light yellow particles or powder |
| 60% CaCl2 brine FLAPI,mL | ≤10.0 |
| Reduction rate of linear expansion,% | ≥50.0 |
DACP-1 has good thermal stability and has a temperature resistance of 120 ºC.
DACP-1 is non-toxic and easy to biodegrade, and it is an ideal additive for the preparation of double protection (reservoir protection and environmental protection) drilling and completion fluids.
DACP-1 has strong ability of salt and calcium pollution resistance, and can be used to prepare solid-free drilling and completion fluids weighted with various inorganic salts.
They shall be packaged in 25kg multi-wall paper sacks. They shall be stored in a shady, dry, and ventilated place.
They shall be avoided contact with eyes, skins and clothes, otherwise flush it with clean water.Handling methods and dangerous data shall be referred to MSDS.
| I . Filtration Reducer For WBM | |
| DSP-1 HTHP Polymer Filtration Reducer | |
| DSP-2 Polymer Filtration Reducer | |
| PAN-Trol Low Viscosity Copolymer Filtration Reducer | |
| PAN-Vis HT Polymer For Viscosity Increasing And Filtration Reducing | |
| SMP Sulfomethylated Phenolic Resin | |
| SMP-III Sulfomethylated Phenolic Resin | |
| SPNH Lignite Resin for Drilling Fluid | |
| LYS Modified Starch | |
| SHR-1 Modified Starch HT | |
| DACP Alkyl cellulose polysaccharide for drilling fluid | |
| II. Shale Inhibitor For WBM | |
| NP-1 Nano-polyester for Drilling Fluid | |
| NS-1 Nano-SiO2 | |
| FF-I Sulfonated Asphalt(High purity) | |
| FF-V Sulfonated Asphalt(Ecnomical) | |
| FF-III Emulsified Asphalt | |
| AP-1 Polyamine Shale Inhibitor | |
| POLYOL | |
| DLA-1 Aluminum Based Shale Inhibitor | |
| III. Lubricant For WBM | |
| HEP-1 EP Lubricant for High Density Mud | |
| EP-202 EP Lubricant for Drilling Fluid | |
| EP-204 Oil Base Lubricant for Drilling Fluid | |
| GR Solid Lubricant (Graphite base) | |
| IV. Thinner For WBM | |
| SF Silicon-fluorine Thinner | |
| DLST CF Chromium Free Lignosulfonate Thinner | |
| V. Lost Circulation Materials | |
| SDF3 Compounded LCM | |
| GWS-1 Delayed Expansion LCM | |
| HFD-1 Rapid Filtrating High Strength LCM | |
| VI. OBM Additives | |
| OME-1 Primary Emulsifier for OBM | |
| OME-2 Secondary Emulsifier for OBM | |
| OFC OBM Filtration Reducer | |
| OMP-1 Nano-Polymer Sealing Additive for OBM | |
| OMP-2 Expanded Graphite Plugging Agent for OBM | |
| VII.Defoamer For WBM | |
| Polyether Defoamer | |
| PD-100 Organosilicon Deformer | |
| VIII. Bactericide For WBM | |
| JM-1 Bactericide for Drilling Fluid | |
| IX. Filtration Reducer For Cementing | |
| DSPC-1 Filtration Reducer For Cementing | |
| DSPC-2 Filtration Reducer For Cementing | |
| X. Other Series | |
| SR301 Pipe Freeing Agent | |
| ZH-2 Corrosion Inhibitor for Drilling Fluid | |
