Audited Supplier
Equivalent to Esab ok flux 10.82 Contact: Tracy
Flux type: Aluminate-Basic
Classification:
(EN 760: SA AB 1 66 AC H5)
Characteristics
SJ301 flux for joint welding of high quality steel pipes for pipeline transportation systems in the oil and gas industries. Especially recommended for single and multi-wire (up to 5 wires) submerged arc processes in the two- run technique. Very good weld appearance and slag release providing flat welds with low reinforcement and flat weld interfaces free from undercuts. High grain hardness and resistance to abrasion and a low consumption rate with good flux feeding properties in the transport and recovery system.
As a result of low hydrogen levels (less than 5 ml/100 g in the weld deposits) and oxygen levels of about 350 ppm as well as uniform metallurgical behaviour with low silicon and manganese pick-up, constant mechanical properties are obtained even when welding thick-walled tubes in the two-run technique.
Application
Production of longitudinal and spiral welded steel pipe grades L360 or X52 to L555 or X80 according to ISO 3183 / API Spec. 5L.
| SiO2+TiO2 | Al2O3+MnO | CaO+MgO | CaF2 | S | P |
| 25-35 | 30-40 | 15-25 | 5-15 | ≤0.05 | ≤0.05 |
Mechanical Performance of the Deposited Metal
Wires | Standard Models | Yield Point Rel(MPa) | Tensile Strength Rm(MPa) | Elongation A (%) | Impact Value Kv2(J) |
| EL8 EM12K | F6A0-EL8 F7A2-EM12K | ≥350 ≥410 | 415-550 480-650 | ≥22 ≥30 | ≥40(0ºC) ≥60(-20ºC) |
Packing Details:
Bag:25 KGS/Kraft Bag With Plastic Lining Inside
Pallet:40 Bags(1 Ton)/Plywood Pallet
Container:20-24 Tons/Container
OEM Packing Design Can Be Accept According To Your Requirement
Products Picture:
Application:
Factory Introduction:
LAIWU HULIN WELDING MATERIALS CO.,LTD. is top three original factory of Welding Consumables in China.
Factory was founded in 1994,quality systerm: ISO9001-2008, Yearly capacity:300000mt
Main products:
Flux(SJ101, SJ301, SJ501,SJ601,HJ431etc.);
Submerged Arc Welding Wire EM12K,EL12
Carbon Steel Welding Rod: AWS(E6011, E6013, E7016, E7018);
CO2 Gas Shield Welding Wire AWS A5.18 ER70S-6(0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm)
Flux Cored Wire(Gas Shield E71T-1C, E71T-1;
Self Shield E71T-GS);
We can meet the needs of the customers according to each country relevant standard.
OEM & buyer label is ok. Technical support can be offered.
Our Service:
1. Professional service for products
2. Much more competitive price
3. Honest and excellent supplier
4. Delivery time is shorter than others.
5. We believe the good quality is the basis for cooperation.
6. We could provide the samples for test to you.
Customers Feedback:
