Audited Supplier
S-2004
Clay Wet Sand
Thermal Gravity Casting
Resin Sand Core
Machinery Parts
CNC Machining
Aluminium & Aluminum Alloy
Spray-Paint
Ra3.2
GB
ISO 9001:2008
AAA
A1
A2
Metal
YY
Carton and Wooden Box
203X220X185, 5.2g
China
8462319000
Product Description
This part made by sand casting with 1 resin cores.
After CNC machining, The part need to be blue painted carefully .
Material is Al alloy ZL104 ,T6 treatment.
A layer of screened fine surface sand is firstly covered on the aluminum mold, then pour in the back sand and hammer it tightly, use flame to dry the surface moisture, carefully place the resin sand core.
With effective degassing to reduce hydrogen, the aluminum liquid is poured into the mold cavity . After cooling, take out the parts, and a beautiful aluminum alloy artwork is displayed in front of us.
By the numerical control hot-box core shooter machine, we can manufacture precision dimensions and high-strength cores, strictly controlling the raw resin sand and the temperature & time parameters of heating. Therefore, the excellent cavity ensures the beautiful surface and good dimensional tolerance of these aluminum products.
After CNC machining, the perfect finished product is successfully made. Especially suitable for manifold and pump or valve components with complex cavities and high pressure requirement.
Our manual molding process is suitable for complex aluminum and copper castings,the mold and casting costs are relatively low and be competitive.
After CNC machining, The part need to be blue painted carefully .
Material is Al alloy ZL104 ,T6 treatment.
A layer of screened fine surface sand is firstly covered on the aluminum mold, then pour in the back sand and hammer it tightly, use flame to dry the surface moisture, carefully place the resin sand core.
With effective degassing to reduce hydrogen, the aluminum liquid is poured into the mold cavity . After cooling, take out the parts, and a beautiful aluminum alloy artwork is displayed in front of us.
By the numerical control hot-box core shooter machine, we can manufacture precision dimensions and high-strength cores, strictly controlling the raw resin sand and the temperature & time parameters of heating. Therefore, the excellent cavity ensures the beautiful surface and good dimensional tolerance of these aluminum products.
After CNC machining, the perfect finished product is successfully made. Especially suitable for manifold and pump or valve components with complex cavities and high pressure requirement.
Our manual molding process is suitable for complex aluminum and copper castings,the mold and casting costs are relatively low and be competitive.
| Product Description | Aluminium Casting and machining Gauge middle housing |
| Actual Part Weight (Kg) | 5.2 |
| Capabilities Applied/Processes | Aluminum sand Casting, Shot Blasting, CNC Machining |
| Equipment Used to Manufacture Part | sand casting machine, Shot blasting machine, HASS CNC Machine |
| Overall Part Dimensions (mm) | 203X220X185 |
| Tightest Tolerances (mm) | 0.02 |
| Material Used | ZL104 Aluminum Alloy |
| Material Finish | Sand blasting |
| In process testing/inspection performed | CMM Inspection |
| Delivery Location | USA |
