Audited Supplier
8011
8011
H14 H24 H16
Sliver, Gold, Red, etc
0.18 -0.25mm
40-1500 mm
Decorations, Closure
ISO9001, ASTM, GB, EN
Cold Drawn
O - H112
Coated
Alloy
8011
Signi Aluminium
Wooden Pallet
sheet
Zhengzhou China
76061190
Product Description
Aluminum Closure Sheet for Bottle Closure 8011
Aluminum Closure Sheet is rolled to very fine tolerances to yield more closure per tonne of stock and to allow uninterrupted operation of high-speed, multiple-cavity presses. Such closure sheet its strength, high formability, low Earring and printable surfaces make it ideal for pilfer-proof caps and vial seals.
Aluminum Closure Sheet is rolled to very fine tolerances to yield more closure per tonne of stock and to allow uninterrupted operation of high-speed, multiple-cavity presses. Such closure sheet its strength, high formability, low Earring and printable surfaces make it ideal for pilfer-proof caps and vial seals.
| Aluminum Closure Sheet Dimensions | |||
| Parameter | Range | Standard | Tolerance |
| Thickness (mm) | 0.18 _ 0.25 | 0.18, 0.20 | +0.005/-0.005 |
| Width (mm) | 50 _ 1250 | 813, 845, 833.8,835 | +0.5, -0 |
| Length (mm) | 400 _ 1000 | 655,706 | +0.5, -0 |
| Diagonal difference for sheet (mm) | 1 max | - | - |
| Coil sizes (mm) | OD: 1450 max ID: 75,150,300, 508 | - | - |
| Coil density (kg/mm) | 3.5 max | - | - |
| Offer for thickness and width outside the range may be quoted on specific request | |||
| Earing of Aluminum Closure Sheet |
| Typical value: < 2 per cent for >=0.18 mm thickness |
| Aluminum Closure Sheet Mechanical properties | ||||
| Alloy (AA) | Temper | UTS (mpa) | % E (min) (at 50 mm gauge length) | |
| Min | Max | |||
| 3105 | H14 | 150 | 200 | 1 |
| 8011 | O | 8.5 | 12 | 15 |
| H14 | 125 | 170 | 1 | |
| H24 | 125 | 160 | 1 | |
| Aluminum Closure Sheet Chemical composition | ||
| Alloy (%) | AA 3105 | AA 8011 |
| Fe | 0.70 | 0.6 _ 1.0 |
| Si | 0.60 | 0.5 _ 0.9 |
| Mg | 0.20 _ 0.80 | 0.05 |
| Mn | 0.3 _ 0.8 | 0.20 |
| Cu | 0.30 | 0.10 |
| Zn | 0.25 | 0.10 |
| Ti | 0.10 | 0.08 |
| Cr | 0.10 | 0.05 |
| Each (others) | 0.05 | 0.05 |
| Total (others) | 0.15 | 0.15 |
| Al | Remaining | Remaining |
| Single number indicates maximum content | ||
| Aluminum Closure Sheet Packing |
| Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection. |
| Alternatively, they are wrapped in a poly-laminated gunny or polythene, strapped with a hoop iron strap and clip and placed on a wooden pallet. Edge guards are used and the sheets are wrapped with protective thermocol sheets. |
| Coil: Coil is placed on wooden pallets in either eye-to-sky or eye-to-wall condition, wrapped in HDPE fabric and hardboard, and strapped with hoop iron. Silica gel packets are used for moisture protection. |
