Audited Supplier
8011 3105
Decorations, Screw Caps, PP Caps
ISO9001, ASTM, GB, EN
Cold Drawn
3000 Series
O - H112
Mill Finish
Alloy
O, H14, H16, H18
0.18 -0.25mm
50 - 1250
400 -1000mm
Commercial and General Engineering Applications
Aluminum Sheets
Rectangular
Signi aluminum
Wooden Case
plate
Zhengzhou China
76071190
Product Description
Coated Aluminum Plates for Screw/PP Caps (8011 3105)
Signi's aluminum plate is rolled to very fine tolerances to yield more closure per tonne of stock and to allow uninterrupted operation of high-speed, multiple-cavity presses. Its strength, high formability, low Earring and printable surfaces make it ideal for pilfer-proof caps and vial seals. Aluminum Plates for Screw Caps
Surface of aluminum cap plate
a. Plain mill finish aluminum strip
b. DOS oil lubricated finish
c. Chromated finish
d. One side golden/white/red/blue/black,etc other colored, other side protective lacquered
e. both sides clear/transparent lacquered
Test item: autoclave test, Hgcl2 test
Tensile strength: 130-155mpa
Elongation: 2.5-3.5%
Earring: 2% Max
Packing: export standard wooden boxes;
Application of aluminum plate
ropp caps, PP cap, roll on pilfer proof cap, aluminum pilfer-proof cap, pilfer proof closure, aluminum bottle cap, aluminum screw cap, tear off caps, flip off caps.
Signi's aluminum plate is rolled to very fine tolerances to yield more closure per tonne of stock and to allow uninterrupted operation of high-speed, multiple-cavity presses. Its strength, high formability, low Earring and printable surfaces make it ideal for pilfer-proof caps and vial seals. Aluminum Plates for Screw Caps
| Dimensions of aluminum plates for caps | |||
| Parameter | Range | Standard | Tolerance |
| Thickness (mm) | 0.18- 0.25 | 0.18, 0.20 | +/-0.005 |
| Width (mm) | 50 -1250 | 867, 762, 584 | +0.5, -0 |
| Length (mm) | 400 - 1000 | - | +0.2, -0 |
| Diagonal difference for sheet (mm) | 1 max | - | - |
| Coil sizes (mm) | OD: 1450 max ID: 75, 150, 305, 405, 505 | - | - |
| Coil density (kg/mm) | 3.5 max | - | - |
| Offer for thickness and width outside the range may be quoted on specific request | |||
Surface of aluminum cap plate
a. Plain mill finish aluminum strip
b. DOS oil lubricated finish
c. Chromated finish
d. One side golden/white/red/blue/black,etc other colored, other side protective lacquered
e. both sides clear/transparent lacquered
Test item: autoclave test, Hgcl2 test
Tensile strength: 130-155mpa
Elongation: 2.5-3.5%
Earring: 2% Max
Packing: export standard wooden boxes;
Application of aluminum plate
ropp caps, PP cap, roll on pilfer proof cap, aluminum pilfer-proof cap, pilfer proof closure, aluminum bottle cap, aluminum screw cap, tear off caps, flip off caps.
