Product Description
Properties:There are two types,anhydrous aluminium sulphate and aluminium sulphate octadecahydrate.
In normal condition,it is Al2(SO4).18H2O;Al2(SO4)3.14H2O
after efflorescence,can be white podwer,glittering flaky or crystalline flakes,odorless,sweet to slight bitter.
Uses:Sewage Treatment.treatment of drinking water.Sizing of paper.Cement Additive
Standared:HG2225-2010
Shape:flake,podwer,2-4cm lump and 2-5mm/3-8mm granular
| Appearance | white flakes or granular or powder |
| Al2O3(%) | 16-17 |
| Fe2O3(%) | ≤0.3 |
| PH | ≥3.0 |
| Water Insoluble (%) | ≤0.10 |
| Type | industry grade |
| Application | water treatment, mordant, tanning agents, etc |
Application
1) Water effluent treatment system
It's used for purification of drinking water and wastewater treatment by
settling of impurities by means of precipitation and flocculation.
2) Paper Industry
It helps in sizing of paper at neutral and alkaline pH, thus improving paper quality
(reducing spots and holes and improving sheet formation and strength) and sizing efficiency.
3) Textile Industry
It is used for color fixing in Naphthol based dyes for cotton fabric.
4) Other Uses
Leather tanning, lubricating compositions, fire retardants; decolorizing agent in petroleum,
deodorizer; food additive; firming agent; dyeing mordant; foaming agent in firefighting foams;
fireproofing cloth; catalyst; pH control; waterproofing concrete; aluminum compounds, zeolites etc...












The company acquired ISO9001 quality management system certification on December 7, 2006, and OHSAS18001 occupational health and safety management system certification and ISO14001 environment management system certification.

On March 8th, 2005, products like strontium , strontium chloride and manganese chloride began to be produced and the annual production capacity reached 5,000 tons.
On December 7th, 2006, we were ISO 9001 certified.
In July of 2007, we were awarded the title of "Chongqing Demonstration Enterprise of Clean Production".
In August of 2008, the first-stage extension project was finished and put into use. The construction of chemical-reaction system for the acid station, strontium , and manganese chloride and strontium chloride production line was accomplished, which enabled the company to produce 10,000 tons products annually.
In October of 2008, company acquired the title of "Second-level Safety Production Standardization.
In October of 2010, the second-stage extension project was finished and put into use. The systematic construction of strontium chloride crystallization and strontium chloride anhydrous production line was accomplished, which enabled the company to produce 18,000 tons products annually.
In March of 2011, the technical improvement for the strontium production line was completed. The annual capacity reached 20,000 tons.









Audited Supplier









