Directions
1.Remove all dirt and contaminants by sweeping the surface before application of the coating;
2.Shake the can well before use
3.Invert can and point at ground or floor;
4.Hold can 4-10 inches above surface to be marked;
5.Or install this can to the spraying handle or spraying cart for straight line marking.
6.Clean valve by spraying upright for 2-3 seconds after each use.
Precautions
1. Keep away from heat, flames, sparks and any other source of ignition.
2. Do not puncture or incinerate container.
3. Store in cool and dry places at temp. Lower than 45 °C, avoid direct sunlight.
4. Keep out of the reach of children.
Packing details:
| Volume | Pack Qty | Carton Specs. | Carton Dimension (estimated) | Container Qty (cartons) | |||
| L(cm) | W(cm) | H(cm) | 20FT' | 40HQ | |||
| 250ml | 24pcs/ctn | Kraft paper | 33 | 22 | 17 | 2500 | 5600 |
| 400ml | 12pcs/ctn | Kraft paper | 27.5 | 20.5 | 20.5 | 2500 | 5600 |
| 650ml | 12pcs/ctn | Kraft paper | 27.5 | 20.5 | 29 | 1816 | 3294 |

















Audited Supplier









