Audited Supplier
IM-M1202
Electromagnetic Relay
Household Appliances Relay, for Energy-Saving, Remote Control, Energy Meter
1
Dc
1
High Power Relay
Sealed Relay
Electromagnetic Type
Miniature
Electric Parameter Relay
Compact Im-M1202 Magnetic Immune Latching Relay Fo
Agsno2
100A, 250VAC
12VDC
Black
IVY
Cartons/Pallet
29*23.5*16mm
Zhejiang, China
8536411000
Product Description
12VDC Latching Relay 100A for Single Phase Energy Meter
Product Description
1, Latching Relay
1) 100A switching capability.
2) Low coil consumption and ultra-low temperature rise.
3) Low contact resistance.
4) High resistance to shocks and vibrations.
5) Outline dimensions: 29x23.5x16mm.
6) Custom-made busbar configuration.
7) UC3 certified (IEC62055-31).
2 Applications
1) Electrical meter
2) Automatic meter reading(AMR)
3) All kinds of household electric applications and automatic control devices etc.
3, Furniture.
1) Compact configuration
2) Small size
3) High switching capacity
| Basic Data | Dimensions(mm) | 29×23.5×16 | |
| Weight ( g ) | ≈40g | ||
| Contact Arrangement | 1A/1B | ||
| Contact Material | AgSnO2 | ||
| Ambient Temperature | -40~+75ºC | ||
| Vibration | 10~50Hz,1.5mm | ||
| Shock | 1000m/s²,(100g) | ||
| Specifications Data | Power Consumption | <3W | |
| Operating Voltage | 10.5-16V | ||
| Max. Switching Current | 100A | ||
| Surge Current | 6000A/10ms | ||
| Motor Resistance | 32(1±15%)Ω | ||
| Contact Voltage | <60mV | ||
| Contact Resistance | ≤1.0mΩ | ||
| Dielectric Strength | Motor to Contact | >4000VAC,50/60Hz 1min | |
| Across Open Contact | >2000VAC,50/60Hz 1min | ||
| Electrical Life(120 cycles/H) | 10,000 (resistance 5 k + perceptual 5 k, co ϕ = 0.5) | ||
| Mechanical Life(3600 cycles/H) | 100,000 | ||
| Pulse Time | ≥60ms(Advise 60ms~100ms) | ||
| Picking-up Time | ≤60ms | ||
| Release Time | ≤60ms | ||
| Insulation Resistance | >1000MΩ(500VDC) | ||
Cautions of Latching Relay:1. Suggestions of relay's input
(1) Polarity- Please check the polarity inside of our technical specification, if a single coil then"+ -" or "- +"is fine,
you can change it with one pulse. If double coil then it's necessary to confirm "-+-" or "+-+" before leaving our factory.
(2)Driving-Please energize the relay at our recommended pulse width, and rated voltage for reliable performance of 1.5
times or 2 times of value or lower driving condition plz confirm with our engineer.
(3) Contact status may be changed during transportation or installation due to the impact of external force,
therefore please reset to the required status.
(3) Contact status may be changed during transportation or installation due to the impact of external force,
therefore please reset to the required status.
2. Suggestions for the relay's output
(1)When choosing the relay with a hard connection, please avoid the external force on load terminals during or after
(1)When choosing the relay with a hard connection, please avoid the external force on load terminals during or after
the installation.
(2)When the relay will be connected with screws or bolts to the relays' terminals, plz make sure your connection is
fastened and prevent the relay from damage or other safety problems due to temp. Rise..
(3)The sampling signal wires of products are limited, please do not pull or torque during installation.
