Audited Supplier
LC-GO-018
Yes
10 Year Exterior Use
Multiple Extrusion
Soft
Opaque
Embossed
PVC+PMMA/PVDF
Not-Selfadhesive/Anti-UV/UV Block
for UPVC Profiles, WPC Wall Panel for Outdoor
Multiple Extrusion
Soft
Opaque
Embossed
Not Self-Adhesive
Yes
2 Years
PVC + PMMA
UPVC Profile Film
1260mm or 630mm
300m or 500m
0.18mm or 0.2mm
≥220kg/Cm²
Gray Scale≥4-5
Solid, Stone Texture, Wooden Grain
COVE
Rolls in Polyfoam Packing Then in Pallet
weather reistance certificate from Japan & German
Suzhou, China
3920490090
Product Description
Introduction:
This product is suitable for initial decoration or repair zones where high weather ability required like walls of public buildings, commercial buildings, star-rated hotels, villas windows, furniture, cylinder, elevator bathrooms and toilets, or places where small area profile laminating needed.
Features:
1, rich in color, strong texture sense, customized cutting shape
2, air-slot contained
There are air-slots in the self-adhesive glue, so no bubble problem appears when laminating.
3, convenient and efficient
The only requirement is a slight of primer, then a hand-laminating could be applied.
4, high weather ability
With test condition 60% humidity, 20 degrees below zero for four hours, then 80 degree for 4 hours, and after a 192-hour recurring thermal shock test, no bubble, no wrinkle and no shedding
5. High Quality Products with raw materials from German
6. Good anti-UV, anti-Shrinkage Capability.
7. Strong tensile and weather resistance.
Tests on our products:
1,Completion of Artificial Weathering Test
By using the UV light to test color stability of the foil,
Up to an irradiation does of 12GJ/m2,according to EN513
2,Water & Moisture Resistance
Completion of Artificial Weathering Test (18min spray condition)
Low moisture absorption, excellent quality stability
3, Energy Efficiency
Material resistance against infrared rays applied to lower surface temperature of lamin ated profile, then add the weather resistance, and longer life time.
This product is suitable for initial decoration or repair zones where high weather ability required like walls of public buildings, commercial buildings, star-rated hotels, villas windows, furniture, cylinder, elevator bathrooms and toilets, or places where small area profile laminating needed.
Features:
1, rich in color, strong texture sense, customized cutting shape
2, air-slot contained
There are air-slots in the self-adhesive glue, so no bubble problem appears when laminating.
3, convenient and efficient
The only requirement is a slight of primer, then a hand-laminating could be applied.
4, high weather ability
With test condition 60% humidity, 20 degrees below zero for four hours, then 80 degree for 4 hours, and after a 192-hour recurring thermal shock test, no bubble, no wrinkle and no shedding
5. High Quality Products with raw materials from German
6. Good anti-UV, anti-Shrinkage Capability.
7. Strong tensile and weather resistance.
Tests on our products:
1,Completion of Artificial Weathering Test
By using the UV light to test color stability of the foil,
Up to an irradiation does of 12GJ/m2,according to EN513
2,Water & Moisture Resistance
Completion of Artificial Weathering Test (18min spray condition)
Low moisture absorption, excellent quality stability
3, Energy Efficiency
Material resistance against infrared rays applied to lower surface temperature of lamin ated profile, then add the weather resistance, and longer life time.
| weather & aging resistance | Yes |
| Environment Friandly | Yes |
| Corrosion Resistance | Yes |
| Outdoor use | Yes |
| Smooth Surface | Yes |
| No Bubble, No shedding, No Wrikle | Yes |
| Boiling water Resistance | Yes |
| Water & Moisture Proof | Yes |
