Audited Supplier
XMTG-2000
Non-Customized
RoHS, ISO9001, CE
Aoyi
LED
Thermocouple:K,E,J; Thermal Resistance:PT100
K(-50~1300/999c), J(-50~999c), E(-50~800c)
1.0 Class 1.0%, 0.5 Class 0.5%
220VAC 50/60Hz
Aoyi
Carton
48*48*86 mm
China
9032100000
Product Description
XMT(1)-2/6 (2)(3)(4)-(5) (2,6 for the series number,the code meaning as shown in the table below)(Note 1).
| (1)letter code:shape size | (2)number code | (3)number code | (4)number code | (5) | ||
| Letter | Shape size W*L*H (Note 2) | Hole size (mm) | Alarm output (auxiliary) (Note 3) | Main output control | Signal input (factory value, Adjustable) | Other |
| A:96*96*75 | 92*92 | 0:no alarm function 1:two-way alarm default upper limit is deviation value,lower limit is absolute value alarm 5:one-way upper limit alarm default deviation value 6:one-way lower limit alarm Default absolute value | 0:two-digit (relay) | 1: thermocouple input | Others remarks of the product. | |
| D:72*72*93(70) | 68*68 | 3:bit type PID (relay on-off ratio) | 2: thermal input | |||
| E:48*96*70 | 45*92 | 8:PID regulates DC voltage output(DC12V) | 3: analog input (Note 4) | |||
| F:96*48*70 | 92*45 | 9:PID regulates analog output (example: 4-20mA, 1-5V) | ||||
| G:48*48*93(82) | 45*45 | |||||
XMT-6000 series is three-digit digital tube display mode;XMT-2000 series is four-digit display mode. Switching power supply(100-240V) is required for the working power supply,which can be customized.
Example mode:XMTE-2531:theexternal size is 48*96,the upper limit of one way alarm,the main output is relay,thermocouple input(but it can be modified,see the instructions for the details later).
Note 2: the number marked in brackets if the depth of the shell,no brackets means the depth of the shell with the same size plug shell is the same.
Note 3: the external size is 48*48 series( is XMTG series) and only one alarm function is supported at most.
Note 4: only analog output type supports analog input(analog generally refers to 4-20mA,1-5V,0-20mA and 0-5V etc.)
Take XMTG series as an example:
Note:if it's inconsistent with the diagram on the meter housing,please refer to the meter housing.
"switch" symbol refers to relay output type;
"Y" is the voltage output type:(positive and negative correspondence)
Generally connected to SSR solid state relay DC voltage control input terminal;
"mA" means continuous current output type:(positive and negative correspondence)
Generally connected with the control current input terminal of SCR solid state module.
