Audited Supplier
YX29.5-285.5-1142 ROOF
12 Months
Gi, PPGI, Aluminum, Stainless Steel, Colored Steel
CE, SGS
New
Customized
Roof, Wall
Gear/Sprocket, Gear Box, Toroidal Worm Box
0.35mm-0.8m
Approx.1335mm
Customized
FUMING
Container
40GP
Xiamen
8455229090
Product Description
| ROLL FORMING MACHINE FOR YX29.5-285.5-1142 ROOF PROFILE | |
| Material Specification | |
| Thickness | 0.35mm to 0.8mm |
| Effective width | 1142+/-10mm |
| Feeding width | Approx.1335mm |
| Material | Aluzinc |
| Yield strength | 235-550MPa |
| Machine Components | |
| 5Ton*1250mm Hydraulic Decoiler | |
| Coil inner hole expanding | Hydraulic system, 3KW pump motor |
| Speed regulating | Frequency inverter, 3KW motor |
| Expanding type | Taper wedge expanding system |
| Load capacity | Max.5Tons |
| Coil inner diameter | 510±30mm |
| Coil outer diameter | Max.1600mm |
| Coil width | Max.1250mm |
| Stop/start rotation | Automatic stopping device with limited switch to assist |
| Option | Please refer to decoiler on home page |
| Entry Rollers and Manual Pre-shearing Device | |
| Working thickness | Up to 0.8mm |
| Function | Smart cut control, to cut off the end of the final piece of sheet only |
| Option | Hydraulic pre-shearing device |
| Roll Forming Machine | |
| Driving system | Gear/sprocket |
| Option for driving system | Gear box or toroidal worm box |
| Polythene Film-On Device | Un-powered, with un-coil-rollers at double sides, with rubber shaft to film-on the film |
| Forming station | 20 stations |
| Roller material | 45# steel, CNC lathes, hard chrome coated |
| Option for roller material | Cr12, Cr12Mov |
| Shafts Diameter | Φ95mm |
| Main motor | 15KW |
| Line speed of rollformer | Approx. 20m/min or customized |
| Hydraulic Cutting Device | |
| Cutting type | No Blanking cut |
| Cutting tool material | Cr12, heat treatment |
| Hydraulci pump motor | 5KW |
| PLC Control System | |
| Function | Control the quantity & cutting length automatically |
| PLC | Siemens |
| Touch screen | Siemens |
| Inverter | Schneider |
| Encoder | Omron |
| Cut-to-length tolerance | ≤±2 mm or customized |
| Control Voltage | 24V |
| Product Rack | Un-powered, three units |
| Option | Please refer to Stacker on home page |
