Audited Supplier
DT150GD
Air Cooling
Argon Gas Mixture
Semi-Automatic
Intermediate Frequency
Inverter
150-900mm
DESAN
Nude
410*360*430 22kg
China
84688000
Product Description
1. Summary:
CO2 welding automatic car is widely used in ships, Bridges, locomotives, steel structure, petrochemical and other industries, suitable for a variety of welding structure welding, such as: reinforcement plate, rib plate, cross parts of welding, box beam welding, and so on. Its main advantages are:
to reduce labor intensity, improve the working environment
improve work efficiency, 1.5 times that of manual welding
avoid artificial factors caused by poor welding quality, generally manual operation of the defective rate is around 20%, and adopts the automatic welding of the car is not so defective rate
Therefore, its comprehensive benefit is nearly 200% higher than that of manual welding
high degree of automation to ensure the stability of welding quality
do not need to be very skilled technical workers
DT150-GD is suitable for welding the inner and outer walls of pipes. It does not need rails and can be welded along the arc surface of the workpiece.
2: Features
(1) DT150-GD is an oscillating automatic welding device, which can obtain a wider weld at one time.
(2) Swing speed, swing amplitude, center position and left and right residence time can be adjusted, suitable for a variety of different specifications of the weld passage.
(3) Small volume, light weight, easy to install and move, unskilled workers can also carry out welding.
(4) Installed with permanent magnet, welding can avoid the phenomenon of welding line detachment.
3. Description of main components
Body components: welding torch wiggler, slider, welding torch handle, control box, control panel and other accessories
(1) Wiggler: drive the welding torch for pendulum swing welding
(2) Driving part: the driving power device of the car, which is composed of four magnetic wheels, helical gears, chains and sprockets
(3) Slider part: the device for adjusting the position of the welding torch, which can be fine-tuned before and after welding
(4) Welding torch fixture: the welding torch holding device, can adjust the Angle of the welding torch.
(5) control box; All actions of the car can be adjusted. For details, refer to the operation method of the control panel
CO2 welding automatic car is widely used in ships, Bridges, locomotives, steel structure, petrochemical and other industries, suitable for a variety of welding structure welding, such as: reinforcement plate, rib plate, cross parts of welding, box beam welding, and so on. Its main advantages are:
to reduce labor intensity, improve the working environment
improve work efficiency, 1.5 times that of manual welding
avoid artificial factors caused by poor welding quality, generally manual operation of the defective rate is around 20%, and adopts the automatic welding of the car is not so defective rate
Therefore, its comprehensive benefit is nearly 200% higher than that of manual welding
high degree of automation to ensure the stability of welding quality
do not need to be very skilled technical workers
DT150-GD is suitable for welding the inner and outer walls of pipes. It does not need rails and can be welded along the arc surface of the workpiece.
2: Features
(1) DT150-GD is an oscillating automatic welding device, which can obtain a wider weld at one time.
(2) Swing speed, swing amplitude, center position and left and right residence time can be adjusted, suitable for a variety of different specifications of the weld passage.
(3) Small volume, light weight, easy to install and move, unskilled workers can also carry out welding.
(4) Installed with permanent magnet, welding can avoid the phenomenon of welding line detachment.
3. Description of main components
Body components: welding torch wiggler, slider, welding torch handle, control box, control panel and other accessories
(1) Wiggler: drive the welding torch for pendulum swing welding
(2) Driving part: the driving power device of the car, which is composed of four magnetic wheels, helical gears, chains and sprockets
(3) Slider part: the device for adjusting the position of the welding torch, which can be fine-tuned before and after welding
(4) Welding torch fixture: the welding torch holding device, can adjust the Angle of the welding torch.
(5) control box; All actions of the car can be adjusted. For details, refer to the operation method of the control panel
| NAME | DSC. | RE. | |
| Tractor | Power | AC 220V | |
| oversize | 240×330×310 | W×L×H | |
| G.w | 16Kg | ||
| Drive | 4wheel | ||
| Speed | 0∼700mm/min | ||
| Oscillate motor | DC24V 18RPM | ||
| Slide range | updw | ||
| Left/right | 85mm | ||
| angel | 360° | ||
| 0° | |||
| control | function | Oscillate type | |
| speed | 0-10RPM() | ||
| wdith | 0-±10°() | ||
| Dell time | 0-2S() | ||
| mid | 0-±8° | ||
| speed | 0∼1000mm/min() | ||
