Audited Supplier
E-260
12months
Pre Milling, Gluing, Edge Banding, Fine Trimming, Scraping, Buffing
Linear Edge Banding Machine
0.4-3mm
Automatic
16-23m/Min
CE, ISO
10-60mm
150mm
60mm
Glue Tank Overhead
Customized
12months
12-65mm
380V
50Hz
200Hz
10.35kw
0.6PA
3
100mm*4
1250kg
TQS
Package
5450*680*1235mm
China
8465990000
Product Description
E-260 Automatic Edge Banding machineSeparating spray→ Pre milling→ Glue pot→ Tape pressing with 3 rollers→ End cutting→ Fine Trimming → Scraping → Cleaning spray → Buffing
Machine Body
Machine body has been solid welded by the laser cutting steel, and did the heat treatment, to ensure the structure stability.
Main beam adopts Aluminum profile structure with electrical elevating, which is uniform and rigid.
Machine body has been solid welded by the laser cutting steel, and did the heat treatment, to ensure the structure stability.
Main beam adopts Aluminum profile structure with electrical elevating, which is uniform and rigid.
Control Panel
Adopts 7 inch touch screen, which integrated the
following functions:Function control, Beam elevating, Parameter setting,Temperature controller, Alarm details
Adopts 7 inch touch screen, which integrated the
following functions:Function control, Beam elevating, Parameter setting,Temperature controller, Alarm details
Separating Spray
Before the pre milling function, the machine equipped
with one separating spray device, which will isolate
the dust and adhesive on the board surface, which will
be easy to remove them.
Before the pre milling function, the machine equipped
with one separating spray device, which will isolate
the dust and adhesive on the board surface, which will
be easy to remove them.
Pre-milling Structure
Two pieces 2.2KW high speed motor, to do the
joint trimming before the gluing, to reduce the
adhesive mark on the edge.
Through adjusting the feeding fence position, we
can adjust the milling amount.
Two pieces PCD cutter:φ125mm x φ30mm x
H35mm
Come with dust blower device
With individual dust exhausting hood
Two pieces 2.2KW high speed motor, to do the
joint trimming before the gluing, to reduce the
adhesive mark on the edge.
Through adjusting the feeding fence position, we
can adjust the milling amount.
Two pieces PCD cutter:φ125mm x φ30mm x
H35mm
Come with dust blower device
With individual dust exhausting hood
Glue Pot Structure
The machine underneath glue pot, adopts screw type
extracting structure. The amount of adhesive is
adjusted via pneumatic cylinder.
The machine underneath glue pot, adopts screw type
extracting structure. The amount of adhesive is
adjusted via pneumatic cylinder.
End Cutting Unit
Two pieces 0.37kw high speed motor with 200Hz
frequency and 12000rpm rotation speed
The motor come with manual rotating device,
which can adjust the angle easily.
Saw blades size:104*2.6*22*24Z
Two pieces 0.37kw high speed motor with 200Hz
frequency and 12000rpm rotation speed
The motor come with manual rotating device,
which can adjust the angle easily.
Saw blades size:104*2.6*22*24Z
Fine Trimming Unit
Two pieces 0.75kw high speed motor with 200Hz frequency and 12000rpm rotation speed Motor angle is adjustable.
With individual dust exhausting hoods
Two pieces 0.75kw high speed motor with 200Hz frequency and 12000rpm rotation speed Motor angle is adjustable.
With individual dust exhausting hoods
Scraping Unit
Scraping cutter with R2 radius
With the air blower device
Scraping cutter with R2 radius
With the air blower device
Cleaning Spray Device
With the special cleaning agent spray device, which can help the buffing unit to clean the leaking adhesive on the board surface.
With the special cleaning agent spray device, which can help the buffing unit to clean the leaking adhesive on the board surface.
Buffing Unit
Considering the dual-glue pots structure, the machine comes with double buffing unit, to meet the different color polishing.
Can do the board edge polishing, and remove the leaking adhesive mark on the surface.
Considering the dual-glue pots structure, the machine comes with double buffing unit, to meet the different color polishing.
Can do the board edge polishing, and remove the leaking adhesive mark on the surface.
Automatic Lubrication Pump
Which will do the automatic lubrication to the linear guide way on the end cutting unit, to extend the using life of the structure.
Which will do the automatic lubrication to the linear guide way on the end cutting unit, to extend the using life of the structure.
Low-voltage apparatus
Input power: 3~380v,50hz Circuit brake, 24V power supplier and AC
Contactor are from Schneider France. Delta PLC is from Taiwan.
Brand parts will ensure the safety and stability of the control system.
Input power: 3~380v,50hz Circuit brake, 24V power supplier and AC
Contactor are from Schneider France. Delta PLC is from Taiwan.
Brand parts will ensure the safety and stability of the control system.
Options
The latest appearance design of the edge bander.
Also can do the OEM for your side.
Also can do the OEM for your side.
10inch Touch Screen
Adopts 10 inch touch screen, which integrated the following functions:Function control, Parameter setting, Temperature controller
Alarm details
Adopts 10 inch touch screen, which integrated the following functions:Function control, Parameter setting, Temperature controller
Alarm details
Vertical glue pot
The machine adopts vertical glue pot, which can process the
adhesive like EVA and PUR.
The glue pot come with two pieces individual glue buckets.
With quick changing design, to enhance the working
efficiency.
The machine adopts vertical glue pot, which can process the
adhesive like EVA and PUR.
The glue pot come with two pieces individual glue buckets.
With quick changing design, to enhance the working
efficiency.
| |
| E-220 AUTOMATIC EDGE BANDER MACHINE | E-240 AUTOMATIC EDGE BANDING MACHINE |
| |
| R45 COMPUTER TABLE SAW | TS-320 SLIDING TABLE SAW |
1. What's your guarantee? Which type of after-sale service can you provide to us?For all the machines, we can offer a 1-year guarantee to our customers; for any parts damaged due to the quality issue, we will send the parts via DHL, FedEx, or air shipment urgently.
After-sale service: if you purchased our CNC nesting center or edge bander, and we don't have any dealer or agent in your region, we will send our engineer to your site for installation and training ( you should pay the round-trip flight ticket, salary of engineer- each day 100.00USD, also take charge of the local accommodation. ). Considering the situation, we can do the online training. Also any small issues, you can knock us online, we will offer rapid action to your concerns.
2. Which type of payment term can you accept? How could we keep our capital safe?
We can accept the T/T and L/C at sight. We have more than 10 years of exporting experience, so we know more about the capital safety concern of our customers. We will offer the video call or pictures to your side, during our loading, then you can check what we have done for the loading, if any cheating, then you can control your payment (T/T or L/C).
3. What is the leading time, if we did the payment to your side?
The leading time of most common machines will be 10-25 days after collecting the down payment/copy of L/C. Specially designed production will take a little bit longer time.
4. Can you accept some O.E. M service to us? or any other service could you do for us?
We have more than 15 years experience in the woodworking machinery industry, also have more than 5 experienced engineers, so we can do the special design according to your requirement.
Also, our exporting team has more than 10 years of experience in this field, so they can help you to purchase relevant products, parts, or tools, which can save your time and your cost.
https://tqscncmachines.en.made-in-china.com/product/gmNUYMZWCBRl/China-Automatic-Edge-Banding-Machine-High-Speed-Edge-Bander-Machine-E-220.html
