Audited Supplier
STD-SV
on Line Available
1 Year
General Punching Machine
Closed Punch
Single Action
Crank Press
Artificial
Automatic
Mechanical Drive
High Precision
CE, ISO 9001
New
Pressing Metal Products
Bearing, Pump, Gear, Motor, Gearbox, PLC, Pressure
Provided
Customizable
1200 Tons
Qiao Sen
Standard Export Package
STD-SV
Jiangsu, China
84629910
Product Description
| Name | Unit | STD-110sv | STD-160sv | STD-200sv | STD-250sv | STD-300sv | STD-400sv | STD-500sv | STD-600sv | STD-800sv | |
| Press capacity | Ton | 110 | 160 | 200 | 250 | 300 | 400 | 500 | 600 | 800 | |
| Impulse position | mm | 5 | 5 | 5 | 6 | 6 | 6 | 7 | 8 | 9 | |
| Slider strokes per minute(S.P.M) | Swing mode | mm | ~100 | ~100 | ~100 | ~75 | ~70 | ~70 | ~70 | ~70 | ~60 |
| Full stroke | mm | ~60 | ~60 | ~60 | ~50 | ~40 | ~40 | ~40 | ~40 | ~35 | |
| Max mold height | mm | 450 | 450 | 450 | 500 | 550 | 600 | 650 | 650 | 650 | |
| Slider adjustment amount | mm | 100 | 100 | 150 | 150 | 150 | 150 | 150 | 150 | 150 | |
| Slide Area | mm | 750*700 | 750*700 | 700*700 | 800*800 | 900*900 | 1000*1000 | 1200*1200 | 1300*1300 | 1400*1400 | |
| Bolster Area | mm | 750*800 | 850*800 | 900*900 | 1000*1000 | 1100*1100 | 1200*1200 | 1400*1200 | 1500*1300 | 1600*1400 | |
| Side opening | mm | 700*500 | 700*500 | 700*500 | 700*600 | 700*600 | 900*650 | 900*650 | 900*700 | 900*700 | |
| Servo motor torque | Nm | 4500 | 7500 | 12000 | 15000 | 21000 | 28000 | 37000 | 46000 | 65000 | |
| Air pressure | kg*cm² | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | |
| Press accuracy grade | Grade | JIS 1 | JIS 1 | JIS 1 | JIS 1 | JIS 1 | JIS 1 | JIS 1 | JIS 1 | JIS 1 | |
| NOTE:Our company is ready to carry out research and improvement work at any time. Therefore, the size design characteristics specified in this catalogue can be changed without further notice. | |||||||||||
| > | Hydraulic overload protection device | > | Air blowing device |
| > | Electric slider adjusting device | > | Mechanical shockproof feet |
| > | Variable frequency variable speed motor (adjustable speed) | > | Mis-feeding detection device reserved interface |
| > | Electronic cam device | > | Maintenance tools and toolbox |
| > | Digital die height indicator | > | Main motor reversing device |
| > | Slider and stamping tools balance device | > | Light Curtain (Safety Guarding) |
| > | Rotating cam controller | > | Wet Clutch |
| > | Crankshaft angle indicator | > | Electric grease lubrication device |
| > | Electromagnetic counter | > | Touch screen (pre-break, pre-load) |
| > | Air source connector | > | Mobile electric control cabinet and console |
| > | Second degree falling protecting device | > | LED die lighting |
| > | Forced Thin Re-Circulating Oil Lubrication System Device | > | 8-Points Slide Guiding |
| > | Customization Per Customer Requirement | > | Tonnage Monitor |
| > | Die Cushion | > | Die Doors |
| > | Quick Die Change System | > | Moving bolster |
| > | Turnkey System with Coil Feedline and Automation System | > | Anti-Vibration Isolator |
High strength steel frames
with small deformation
with small deformation
Slide rail adopt high frequency quenching technology,
its hardness could reach HRC45 degree or more.
Advantage: perfect wear resistance
its hardness could reach HRC45 degree or more.
Advantage: perfect wear resistance
The gear shaft is made of high-strength alloy,
all tooth surfaces are treated with medium frequency
Advantage: small wear, high accuracy,long service life
all tooth surfaces are treated with medium frequency
Advantage: small wear, high accuracy,long service life
Crankshaft
Alloy 42 CrMo Material
Advantage: 1.3 times Stronger than 45 steel
Alloy 42 CrMo Material
Advantage: 1.3 times Stronger than 45 steel
Ball Seat
Japanese grade TM-3 sintered copper alloy
Advantage: less failure rate with sawtooth ball
Japanese grade TM-3 sintered copper alloy
Advantage: less failure rate with sawtooth ball
Features
- The press frame is composed of three parts (cover, middle platform body, and base), and finally connected with a reinforcing rod to form a solid lock.
- The frame and slider have high rigidity (deformation) of 1/9000: small deformation and long accuracy retention time.
- Presses below 600 tons use pneumatic wet clutch brakes (unibody), while presses above 800 tons use dry clutch brakes (split-type).
- The slider adopts 8-points slide guiding, which can bear large eccentric loads, ensuring long-term and stable maintenance of stamping accuracy.
- The slide rail adopts the "high-frequency quenching" and "rail grinding process": low wear, high precision, long accuracy retention time, and improved mold service life.
- Adopting a forced thin oil circulation lubrication device: energy-saving, environmentally friendly, equipped with automatic alarm function, which can increase the stamping frequency by adjusting the oil volume.
- The crankshaft is made of high-strength alloy material 42CrMo, which is 1.3 times stronger than 45 steel and has a longer service life.
- The copper sleeve adopts tin phosphorus bronze ZQSn10-1, which has a strength 1.5 times higher than ordinary BC6 brass. It adopts a highly sensitive hydraulic overload protection device, which can effectively protect the service life of the punching machine and mold.
- Standard Japanese SMC pressure regulating valve, oil mist filter, and air filter.
- Standard configuration: German Siemens touch screen and Siemens motor.
- Optional die cushion.
- Optional Moving bolster
> Training:
Qiaosen provide complete training for our aboard customers through Internet so that operators, supervisors and maintenance team could know well of operation and maintenance as well as simply trouble shootings.
> Maintenance:
Qiaosen in-house maintenance department are responsible for internet inspection and suggestion immediately. If the remote guidance couldn't solve the issue, we will arrange the professional engineers to the door for maintenance by paid service.
