Audited Supplier
DP-1200RTH
Video Technical Service , Spare Parts Offer Servic
3 Years
Pre-Coating Laminating Machine
Film Material
Electric
Automatic
Matt Film
Hot Laminating
Anti Wrinkle
12 Months
Heating Pipe/ Rubber Roller /Air-Shaft
1300mm
Max 1000mm
200
DP
Wodden Case
1200
Kunshan
8441100000
Product Description
Carbon heating film laminating machine
also can processing other pre-coating film and material laminating
with automatic servo motor control
with Automatic tension control
with automatic rectification system
with inspection table to check laminating quality
with mould heating machine for control heating and cooling of material
with chromed surface of laminating rollers and rubber silicon laminating rollers are ok
Can add Nip roller for pulling material if required
PLC use Mitsubishi Brand 
1, technical parameters
| Machine speed: | 5-30m/min (adjustable) |
| Maximum width of raw materials: | 1200mm |
| FIRST UNWINDING diameter: | 500mm |
| SECOND UNWINDING diameter: | 500mm |
| Copper strip diameter: | 400mm |
| Rewinding diameter: | 600mm |
| Voltage: | 380V 50HZ |
| Total power: | 10kw |
| Raw material roll paper core diameter : | 3 inch |
| Compressed air source: | (0.4-0.6) Mpa (customer-owned) |
2, UNWINDING device
Up and down UNWINDING air expansion shaft (3′′ tile type air expansion shaft) : 2 sets
Copper strip UNWINDING shaft plus magnetic powder brake : 2 sets
Copper strip automatic RECTIFICATION correction system:2 sets
Magnetic powder brake 50N (Shengda) : 4 sets
UNWINDING constant tension control system : 4 sets
Servo RECTIFICATION SYSTEM (Shenzhen Yupeng Technology) Ultrasonic Sensor : 3 sets
Ball screw (Taiwan HIWIN ) : 2 pieces
3, unwinding material laminating department
Warming iron roller Ø400 (chrome plated mirror surface) 50-60H : 1 piece
Lower heating laminating roller Ø400 (imported silica gel) : 2 pieces
.....
4, the coil Rewinding department
REWINDING air shaft (3′′ tile type air expansion shaft) : 1 set
Main motor: 2.2KW (Taiwan Dongli): 1 set
Main motor inverter: Mitsubishi : 1 set
Electromagnetic clutch : 1 set
Servo RECTIFICATION Correction (Shenzhen YUpeng Technology) Ultrasonic Sensor 1 set
...................
6, electronic control panel 1 set
7. Introduction to the main functions of this machine
Frequency control, easier operation and more precise control.
The rewinding magnetic powder tension is independently controlled and can be rewinding at the same time or used alone.
The electronic meter has an automatic meter setting length and automatic shutdown.
