Audited Supplier
| technical specification | Machine configuration and selection | ||||
| project | project | specification | unit | parets name | brand |
journey | X-axis (diameter measure) | 900 | mm | numerical control system | KainDI K1000TF1i |
| Z-axis | 350 | mm | Servo spindle drive | KainDI | |
workbench | workbench size (L * W) | 680*200*30 | mm | servo motor | KainDI |
| T-slot ((Slot number * Slot width * slot distance) | 3*20*50 | mm | spindle units | Pengyou | |
| Maximum load of workbench | 250 | kg | Lead screw bearing | Haebin | |
principal axis | taper hole of spindle | 40 ° | lead screw | Qijian | |
| Spindle through hole diameter | Φ49 | rail line | Taiwan | ||
| Spindle chuck inner hole | Φ56 | coupling | Aodisi | ||
| Spindle head form | A2-5 | illuminating system | LED | ||
| Mainshaft tube | 48*1.5 | alarm light | Huanantiancheng | ||
| Inside hole of bar material | Φ40 | contactor (switch) | CHINT | ||
| Clamping mode | hydraulic pressure | hydraulic pressure station | Xiaocun | ||
| kind of drive | Belt drive/electric spindle | ||||
| speed of mainshaft | 50-3500 | rpm | |||
motor | Synchronous spindle power | 5.5 | kw | ||
| X-axis motor | 6 | nm | Machine picture (for reference only, subject to the actual) | ||
| Z-axis motor | 7.7 | nm |  | ||
feed | X/Z axis fast moving speed | 20000 | mm/min | ||
| X/Z axis feed movement speed | 20000 | mm/min | |||
| repeated accuracy | ±0.003 | mm | |||
Other | Machine weight (KG) | 2100 | KG | ||
| Machine floor area | 2000*1450*1700 | mm | |||
| Air Pressure | 0.4-0.8 | Kg/cm2 | |||
| power capacity | 7 | KW | |||
Figure 1-2 Appearance of the feeder (for reference only)
Figure 1-3 Appearance of the chip extractor (for reference only)
1.Q:Can we pay by L/C?
A:Yes, we can do T/T, L/C etc.
2.Q: What is your payment terms?
A:Our payment term is 50% T/T in advance, 50% T/T before shipment.It is negotiable.
3.Q: What is your delivery time?
A:Usually, one machine takes 15-20 days. IF we have in stock, we can arrange shipment as soon as we receive the payment.
4.Q: Can we go to your factory and learn how to use the machine?
A:We sincerely welcome you come to our beautiful city. The training is free. It would be great honor to us.
5.Q:Can you arrange training in our place after we bought your machine?
A:We can arrange oversea training. Buyers will be responsible to the costs.
6.Q:How many Voltage ? How many Phases 1 or 3? How many hertz (Hz)? of your machine?
A:Our standard is 3 phase, 380V, 50/60Hz. All can be customer made.
7.Q: Do you have CE certification?
A: yes, we have CE certification, machine quality is guaranteed.
8.Q: How can I get the quotation?
A:You can send the inquiry on made in china, or send email to us. It is better if you can tell what is your detailed requests. We will reply to you within 1 hour.
