Audited Supplier
Mineral oil separator
Separator with itself advanced centrifuge technology makes this material much better exploited by humans.
Mineral oil separator is mainly used for used oil fuel which from ship or land station purification or lubrication regeneration.
It can dehydrate the turbine oil, remove oil sludge, colloid , emulsion and other impurities and enhance the maintenance level of the equipment.
During the treatment, there is no need of stopping the machine and replacing new oil, the noise is low and the purifying capacity is high.
It can reduce the diesel engine abrasion and prolong the machine's life, and ensure the diesel engines can operate normally. The maximum viscosity of treated oil can up to 380cst/50ºC(3500SRW1/100ºF)
| Model | DHKY470 |
| Capacity(m3/h) | 3-10 |
| Motor power(kw) | 15 |
| Weight(kg) | 1880 |
Application
Treatment of fuel Treatment of lube
Treatment of oil, water and solid substances Treatment of drilling slurry
Water removal of crude oil Treatment of cooling lubricant
Treatment and water removal of lubricant and hydraulic oil Treatment of waste emulsion and waste oil
Treatment of aging oil
Machine Parts
Brand: Juneng
Original: China
All parts & components contacting materials are made of stainless steel, can effectively minimize the corrosion from the materials to be separated, and meet hygienic requirements for food.
Machine Parts
Original: China
The drum is a component to separate material and rotates at high speed, is the heart of the separator.
The separator bowl has gone through precise dynamic balance, it can run steadily, with low vibration and noise at operation.
Machine PartsName: Equipment Base
Original: China
Underframe is the main part for supporting the whole separator and connecting base, all four supporting feet of the baseframe are equipped with damping rubber pads, which can isolate vibration between the separator and building very well.
Machine Parts
Name: PLC Control Box
Original: China
The separator is equipped with an automatic control cabinet. It consist of an industrial computer and auto overload protector, is highly automated, highly adaptive to change in process, easy to adjust, can greatly reduce the operation labor of workers.
QA & QC
1. Material Test Report
2. Magnetic Particle Examination
3. Nondestructive Examination
4. Liquid Penetrant Examination
5. Dynamic Balancing Test
6. Radiographic Examination
Recently years, we achieve plenty of honors and we have obtained various certifications such as CE certificates, ASME U certificate and ISO 9001 certificate.Packing & DeliveryOur Service
After-sales Service Technical Team.
Our company has set up a professional after-sales service technical team. All sell-offs products shall have engineer to guide installation, assist debugging and train operators until they have mastered them.
If problem occurs while the equipment operation, we will immediately process it, promise to feedback within two hours after informed. After-sales service engineer shall be arranged to the site to solve the problems. He will never leave, until the user satisfaction.
Our After-sales service engineer would always be asked to try their best to make the equipment goes well. Would you please give them some words on whether they are professional or not.We will appreciate if you could help finish our Feedback of Installation and Commissioning
