Audited Supplier
| Mode | LWS-16S200A-809V3 |
| PCM Size | L238.4*W95*T17.5 mm |
| battery series | 16S Available |
| working current | 200Available |
| Usage(Cell Type) | Li-ion battery packs (51.2V/cell) LiFePO4 battery packs (59.2V/cell) |
| Application | Ebike, Solar products, etc |
| Sample | available |
Feature:
1.Provides protection for 16 series LiFePo battery pack
2.Provides protections in charging and discharging
3.Processes the balance between cells smartly, the current of it can be set freely by external components.
4.Deals with over-current and short-circuit protection with circuit itself
5.Protect an electrical circuit from damage caused by over current/ over load or short circuit
6. Low temperature heating function
7.Support RS485 protocol
8.Support CAN protocol
9.Support bluetooth protocol
LWS-16S200A-809 (16S) for LiFePo battery pack of 16 cells in series is a battery protection solution of LWS's, can support a load with very stable, in addition that the continuous current may be up to 100A
| Smart 16S 200A BMS for 51.2V Lifepo4 Battery is a sophisticated battery management system designed for monitoring and protecting a 16-cell Lifepo4 battery pack with a voltage of 51.2V. |
| Shenzhen Li-ion Battery Bodyguard Technology Co.,LTD | ||||
| PCM Specifications For 51.2V (16S) Lifepo4 Battery Packs | ||||
| Model: LWS-16S200A-809 (16S) for start-up battery pack | ||||
| No | Test item | Criterion | ||
| 1 | Voltage | Charging voltage | DC:58.4V CC/CV | |
| Balance voltage for single cell | 3.2±0.025Vc | |||
| 2 | Current | Balance current for single cell | 75±20mA | |
| Current consumption -sigle cell | ≤50μA | |||
| MAX Continuous charging/discharge current | ≤100A | |||
| MAX Discharging current (time) | none | |||
| 3 | Over charge Protection | Over charge detection voltage for single cell | 3.75±0.025V | |
| Over charge detection delay time | 0.5~1.5S | |||
| Over charge release voltage for single cell | 3.5±0.05V | |||
| 4 | Over discharge protection | Over discharge detection voltage for single cell | 2.50±0.05V | |
| Over discharge detection delay time | 500~1500mS | |||
| Over discharge release voltage for single cell | 2.8±0.10V | |||
| 5 | Over current protection | Over discharge current protection | 120±10A | |
| Detection delay time 1 | 500~1500mS | |||
| Detection delay time 2 | 500~1500mS | |||
| Overcharge current protects current | 80±10A | |||
| Detection delay time | 500~1500mS | |||
| 6 | Short protection | Short circuit protection current | ≈1000A | |
| protection delay time | 50-800us | |||
| Release condition | Cut load,Automatic recovery | |||
| 7 | Resistance | Protection circuitry(MOSFET) | ≤5mΩ | |
| 9 | Temperature | Operating Temperature Range | -20~+60ºC | |
| Storage Temperature Range | -20~+60ºC | |||
| LWS is a famous Smart 16S 200A BMS for 51.2V Lifepo4 Battery manufacturers and suppliers in China. We are proud of the products made in China. Our products are both customized and high quality. Besides, we have our own brands and we also have CE certification. You can buy Smart 16S 200A BMS for 51.2V Lifepo4 Battery with reasonable price from our factory. If you are interested in our products, we will provide you price list and quotation. |
| First step: connect the B-to the battery negative terminal (the B-needs to be welded the stub first).and then connect the cables (before connecting the cablesremove the cables from the bms) Second step: start wiring from B-B-is connected to the battery total negative terminal(will say this name to number 1 ). The sideline B1 is connected to the positive of number 1 battery.the third line B2 is connected to the positive of number 2 batterv.the fourth line B3 is connected tothe positive of number 3 battery and so on. Third step: After the cables wired,test the voltage what between each two adjacent lines from the first one,the voltage of Li-ion battery should be less than 4Vthe voltage of LFP battery should be less than 3.5V.After checking.insert the line. Fourth step: And then connect the negative terminal of charger and of load to P-/C-B-and P-/C- should be wiring with bold cableThe wiring method requires the order must to be correct. |
FAQ Q:How can we guarantee quality? |
