Audited Supplier
BT-BP4GLTE-IC2W
20-6000MHz
Tdd-LTE/FDD-LTE
Security Force
<30W
<2.5kg
boostel
Suitcase
34.0*29*7.0cm(L*W*H)
China
Product Description
1, TDD/FDD all-in-one design supports two frequency bands working at the same time. It can work in any two of B1/B3/B8/B28/B40/B41 frequency bands, supports inter-standard, inter-operator and inter-band frequency polling, with millisecond polling time.
2, The working frequency point supports intelligent self-configuration, through sweeping the network, to realize intelligent self-configuration, intelligent configuration of the appropriate frequency point.
3, Transmitting power 2W, the effective distance in outdoor environment is not less than 400 meters. The effective distance is about 50~80 meters in indoor covered environment.
4,Compact size and light weight, easy for operators to carry.
5,Low heat generation when working, and equipped with silent fan, no noise when working, not easy to cause external attention.
6, Frame bias self-configuration, dynamic air port synchronization, continuous correction of frequency deviation and other processing mechanisms to ensure that the work process does not affect the surrounding other non-target phone.
7, Support dynamic air port synchronization, and synchronization to maintain a long time, can be in the GPS and air port are not synchronized in the case of normal operation, suitable for indoor environment without synchronization.
8, Easy to manage via mobile app, only need to send down the blacklist to automatically configure the work.
9, Support independent working mode and single soldier working mode, can work independently positioning, can also cooperate with the single soldier for positioning work.
| Item | Parameters |
| Frequency band | TDD/FDD all-in-one design, support two frequency bands work at the same time. Support B1/B3/B8/B28/B40/B41 to work in any two frequency points. Supports inter-standard, inter-band and inter-operator multi-frequency polling. |
| Single board hardware parameters | CPU: BCM 61755 1.2GHz |
| RAM: 1G | |
| FLASH: 256M | |
| RF Performance | Output Power: Max. 2W |
| Receiving sensitivity: -105dBm | |
| Synchronization accuracy: 0.1ppm | |
| Interfaces | Power Supply Port *1 (DC12V) |
| RJ45 port *1 | |
| Power consumption | <30W |
| Dimensions | 20.0*20.0*7.0cm(L*W*H) |
| Weight | <2.5kg |
| Material of case | Engineering Plastics |
| Installation | Portable,with shoulder bag |
| Color | Black |
| Power Supply | Battery Built-in(working status>2.5hours) |
| Antenna | Built-in directional antenna with10dBi gain |
| Working temperature | -35°C ~ +55°C |
| Humidity | 10% ~ 90% |
| Software Features | IMSI capture, blacklisted IMSI location |
| Multi-frequency combined information acquisition | |
| Support Black Box | |
| Public network environment scanning, intelligent self-configuration of parameters | |
| Adjustable power of equipment | |
| Support GPS, air port and PTP three synchronization methods | |
| Periodic collection configurable | |
| WiFi hotspot management with optional 3G/4G data backhaul | |
| Mobile phone APP management and viewing, collection data can be exported. |
Performance Index
| Item | Acquisition performance (public network RSRP-90dBm, measured data) |
| Outdoor positioning distance | 350 meters |
| Indoor positioning distance | 80 meters |
| Positioning accuracy | <1m |
Attachment: Management APP functional parameters
| Login software username password management. Support changing login password |
| Automatic configuration of device working parameters, only need to configure the blacklist to work automatically |
| Support configuration of public network environment scanning parameters, intelligent configuration function switch |
| Support band frequency polling parameter setting |
| Support target redirection to the specified frequency point of the specified system |
| Support for viewing, exporting and clearing of collection data |
| Support configuration management target blacklist, automatically lock the target after successfully caught the target. |
| Support voice report value target signal strength, lock the target direction |
| Support data collision function, support IMSI and MAC data collision |
| Support Black Box |
Q1. Could I get a sample before bulk order?
Yes, we offer the sample for all models with charges.
Q2. Do you accept OEM / ODM order?
Yes, we can customize the brand logo, colors, frequencies and etc....
Q3. Delivery & Shipment Date:
It is expected 25-30 working days after the fund/deposit received.
Q4. How can i get the price?
We usually response within 24 hours after we get your inquiry(Except weekend and holidays). If any urgent situation, please contact us by WhatsApp or E-mail.
