Audited Supplier
CBB60
Polypropylene Capacitor
AC / Motor
Through Hole
1-100 UF
Variable Capacitor
Polypropylene
Electric Heating
Low Frequency Coupling, Tuning, Filter, Low Frequency Bypass
Polystyrene Capacitor
Paper Capacitor
(1+1/2+2/3+3/4+4)Terminal; (2+3+4, 4+4+4)Terminal
Classa:30, 000hrs, Classb:10, Classc:3000hr
S2
Cylinder
UL, TUV, Bis, CQC
250V.AC~500V.AC
±5%
Original Manufacturer
-40~70ºC, -40~85ºC, -40~105ºC
Pinge
50PCS/Carton
450V 5-100UF
Shunde, Foshan
85322590
Product Description
Features and use
The capacitor has advantages of low dissipation,high insulation resistance,good self-healing character,anti-striking current,strong over-carrier capacity and steady electric performance,and reliable safety with inner anti-explosion device,etc.It is applied in air conditioning,refrigeration,it is helpful for motor's starting and running.
Product characteristics
Non-inductance winding structure
Excellent self-healing performance
Small equivalent series resistance
Fast heat dissipation,Low temperature rise
Corrosion resistant,Stable performance,high reliability
, Safety, fire and explosion protection
| Model | CBB65 Motor run and start capacitor |
| Safety approvals | UL /TUV/VDE/CQC |
| Quoted standard | GB/T3667.1, UL810 ,EN60252-1 |
| Type of working | Continuous |
| Operating class | CLASS B - 10000 hours CLASS C - 3000 hours |
| /Operating Min. / MaxTemperature: | -25/70ºC;-40/70ºC;-40/85ºC;-40/105ºC |
| Storage: | -40 / 70ºC |
| Rated Voltage UN (a.c.): | 250~500 VAC |
| Rated Frequency fN(Hz): | 50Hz / 60Hz |
| Voltage rise/fall time (max): | 15 V/µs |
| Maximum Permissible Voltage: | 1.10 x Rated Voltage |
| Maximum Permissible Current: | 1.30 x Rated Current |
| Dissipation factor, tgδ: | 20 x 10-4 at 20°C, 50 Hz |
| Class of safety protection: | S2(P2) |
| Maximum altitude: | 2000 m |
| Capacitance Tolerance (standard) | ± 5 % |
| Mounting: | Any position |
| Case | Al |
| Filling Resin | Oil |
| Dielectric | Polypropylene film |
| Plates | Self-healing metal layer |
| Voltage test terminal to terminal | 2 x UN for 5 s |
| Voltage test terminal to case: | 2200 Volt for 2 s |
| Insulation resistance (20ºC) | Between terminals≥2000MΩ .μF (500Vdc,60s) |
| Leakage - Clearance in air between parts under voltage | ≥ 5mm |
| Vibration test | IEC 60068-2-6 |
