Audited Supplier
BP-8176-3D
Lifetime Maintenance
1 Year
3D Filament Extruder
PP PE ABS PLA PVC Polystyrene WPC XPS etc
3D Filament Extruder
One or Multiple Feed
Separate Type Extruder
Single-Screw
Full Intermeshing
Deep Screw
Exhaust
Automatic
Computerized
BAOPIN
Plywood Package
1250*500*950 (W*D*H) mm
China
8477209000
Product Description
Baopin pla abs pvc peek carbon plastic small lab 3d filament extrusion line
The screw and barrel of the lab 3d filament extrusion line are made of 38CrMoAl chromium-molybdenum steel. And it is with the surface-layer processing of tempering, nitriding, chroming, polishing and super-precision grinding, the hardness HRC55~60, roughness Ra≤0.4μm, nitriding depth≥0.6mm.
The lab 3d filament extrusion line is suitable for PLA, ABS and other printed material extrusion, is featured by plasticizing, coloring, dispersing, homogeneity, and filling modification.
Parameters:
1. Single screw extruder
2. Mold ( 1 set )
3. Water tank
4. Tractors
5. Closed loop
Features:
The screw and barrel of the lab 3d filament extrusion line are made of 38CrMoAl chromium-molybdenum steel. And it is with the surface-layer processing of tempering, nitriding, chroming, polishing and super-precision grinding, the hardness HRC55~60, roughness Ra≤0.4μm, nitriding depth≥0.6mm.
The lab 3d filament extrusion line is suitable for PLA, ABS and other printed material extrusion, is featured by plasticizing, coloring, dispersing, homogeneity, and filling modification.
Parameters:
1. Single screw extruder
| Screw diameter | Φ 20mm |
| Length diameter ratio | 1 : 28 |
| Screw rotation speed | 0 - 95 rpm |
| Power supply | 3 ∮, five lines |
2. Mold ( 1 set )
| Material | S 136 alloy |
| Aperture | Φ 1.75mm, Φ 3mm (optional) |
3. Water tank
| Tank material | 304 stainless steel bath |
| Fan | 0.15 KW |
4. Tractors
| Traction speed | 1.5 ~ 10 m/min adjustable |
5. Closed loop
| Wheel traction | Single wheel traction |
| Colsed circle plate | Φ 150 plate diameter optional |
Features:
- The lab 3d filament extrusion line is used to produce PLA, PE, PP, PS, ABS and other materials. 3D printing consumable extrusion line can be used with 25mm or 30mm single screw extruder.
- Product accuracy can reach +/-0.025mm
- Filament die head diameter 1.75-3.0mm, including sizing sleeve
- Vacuum cooling water tank with built-in vacuum pump and water pump
- The heater can keep the water temperature of the water tank at about 45 ºC to avoid the hole of the material strip caused by the extreme cold.
- Venturi negative pressure water absorption drying device at the end of the water tank
