Volumetric water pumps able to offer high pressure in relation to comparatively low powers and which have particularly steady operating curves.
Motor
*Two-pole induction motor(n=2850r. P. M)
*Insulation Class B
*Protection IP44
Material
*Pump body: Cast iron+Stainless steel
*Motor support: Cast iron
*Motor housing: Aluminum
*Impeller: PPO
*Shaft with rotor: AISI304Ss
*Mechanical seal: SIC/Graphite
Single phase 220V-240V/50Hz
Single phase 110V-127V/60Hz if request
Single/three phase 220V/60Hz if request
NO. | TYPE | POWER | MAX.FLOW | MAX.HEAD | INLET/OUTLET | MAX.SUCT | N.W | PACKING DIMENSION | |
(Kw) | (Hp) | (L/min) | (m) | (Inch) | (m) | (K.g) | (mm) | ||
A | HMC-3S | 0.55 | 0.75 | 80 | 33 | 1"*1" | 8 | 11.5 | 420*190*210 |
B | HMC-4S | 0.75 | 1 | 90 | 44 | 1"*1" | 8 | 13 | 440*190*210 |
C | HMC-5S | 0.9 | 1.2 | 100 | 55 | 1"*1" | 8 | 14 | 470*190*210 |







FAQ
Q1: Are you a factory or just a trading company?
A1: Manufacturer,and we focus on the development and production of water pump for more than 20 years.
Q2: Is customized service available?
A2: Of course, OEM & ODM both are available.
Q3: How can I get the quotation?
A3: Leave us message with your purchase requirements and we will reply you within one hour on working time. And you may contact us directly by Trade Manager.
Q4:Can I buy one as sample?
A4: Yes, of course.
Q5: How about your quality control?
A5: Our professional QC will check the quality during the production and do the quality test before shipment.