Audited Supplier
Automation
Computerized
ISO9001:2008, CE
xingfu
10t 20t
Qingdao, China
8419409090
Product Description
Performance Feature
•Whole tyre feed,no need to break, which reduces cost.
Adopt multilevel cooling circulation to get more fuel oil.
•Discharge process through pulse dust removal processing,no dust emissions.
•Easy operation,high efficiency and 2-3 people to operate.
•Plant adopts fully automatic submerged arc welding process,through x-ray detection,to improve the security of plant.
Technological Process
•Tyre transported to reactor by conveyor to pyrolyze.
•Oil and gas from pyrolysis go into gas-liquid separating tower and separate, and enter into condenser to liquify , to get fuel oil, then enter into oil storage tank.
•Coarse carbon black and steel wire from pyrolysis are output by automatic slag remover, transported to carbon black processing system by cooling hoist. Separate steel wire and carbon black through the magnetic separator,to get industrial carbon black and steel wire.
•Steel wire pulled out by winch,compressed into pieces,and do steel scrap process.
•Flammable gas enter into waste gas tank and processed. Then extracted by vacuum pump, enter into water sealed tank and send to hot air furnace to burn.
Main Performance Parameter
Remark:This parameter is just for reference.Size change caused by design improvement
will not inform customers specially.Please refer to documents enclosed with products.
Product Recovery Rate
1. Oil: 40-45%
2. Carbon black: 32-36%
3. Steel wire: 14-16%
4. Syn gas: 5-8%
10T Batch type in Finland
Certifications
•Whole tyre feed,no need to break, which reduces cost.
Adopt multilevel cooling circulation to get more fuel oil.
•Discharge process through pulse dust removal processing,no dust emissions.
•Easy operation,high efficiency and 2-3 people to operate.
•Plant adopts fully automatic submerged arc welding process,through x-ray detection,to improve the security of plant.
Technological Process
•Tyre transported to reactor by conveyor to pyrolyze.
•Oil and gas from pyrolysis go into gas-liquid separating tower and separate, and enter into condenser to liquify , to get fuel oil, then enter into oil storage tank.
•Coarse carbon black and steel wire from pyrolysis are output by automatic slag remover, transported to carbon black processing system by cooling hoist. Separate steel wire and carbon black through the magnetic separator,to get industrial carbon black and steel wire.
•Steel wire pulled out by winch,compressed into pieces,and do steel scrap process.
•Flammable gas enter into waste gas tank and processed. Then extracted by vacuum pump, enter into water sealed tank and send to hot air furnace to burn.
Main Performance Parameter
Item | Type | XFLJ--10 | XFLJ--20 |
Capacity/ 24h | 10T | 20T | |
Working temp. | ≤650° | ||
Fuel | Fuel oil, Natural gas, Liquefied gas | ||
Heating way | Circulating hot air heating | ||
Tyre request | ≤1200 mm | ||
Working pressure | Normal pressure | ||
Flame retardant way | Steam blow | ||
Fuel consumption | 200 kg | 400 kg | |
Size | 7300 × 2400 × 3100(mm) | 7300 × 2400 × 3100(mm) × 2 | |
Total power | 65 kw | 120 kw | |
Power Consumption | 30 kw/h | 60 kw/h | |
Floor space | 25000 mm × 5500 mm | 25000 mm × 11500 mm | |
Highest point of installation | 5000 mm | 5000 mm | |
will not inform customers specially.Please refer to documents enclosed with products.
Product Recovery Rate
1. Oil: 40-45%
2. Carbon black: 32-36%
3. Steel wire: 14-16%
4. Syn gas: 5-8%
10T Batch type in Finland
Certifications
