Audited Supplier
YTST-080
12 Months
Impact Testing Machine
<1000KN
1
Electronic Load
Dynamic Load
Digital
Manual Control
100-500Kg
AC380V
N/a
500*400*400mm
1430*1950*1600mm
80 Liters
+80 Degrees---+200 Degrees
-10degrees-- -40degrees
+60degrees-- +150degrees
+/- 2 Degree
Blue/Gray
SUS#304 Stainless Steel Plate
Stainless Steel Plate + Powder Coated
Yuanyao
Strong Plywood Carton
80 litre
China
9032100000
Product Description
Battery Industry Shock Thermal Shock Climatic Test Chamber
High Temperature Low Temperature Cycling -40C~+85C
High Temperature Low Temperature Cycling -40C~+85C
Introduction&Application:
Thermal shock chamber is used to test the capability of material structure or composite materials to withstand the continuous environmental changes between extremely high temperature and low temperature during a short period, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time. It is applicable to metals, plastic, rubber, electronics amongst other materials. The test result can be used as a reference or basis for product improvement.
Feature:
1. Using powerful air-to-air thermal shock chambers
2. Has hot and cold zones that can be controlled independently
3. Direct-drive lift system for reliability & safety
4. Touch-screen controller for easy operation
Exceptcold heat shock chamber,Yuanyao team also can supply:
Precision Oven Tester, Triple Type Temp. & Humi. Chamber, Temp. &Humi. Control Host, Air Thermal Shock Tester, Liquid Thermal Shock Tester, Salt Spray Tester, Walk-in environmental Test Room, Temp. Humi. &Vibration Conbined Test Chamber, Aging Oven Tester, Rain/Spray Test Chamber, Burn-in test equipment, Dust Tester, Steam Aging Tester, Vibration Tester, Tensile Tester, Drop Tester and so on.
If you want to know more about the product, please feel free to contact me.
| Specification | |||||||
| Model | YTST-050 | YTST-080 | YTST-108 | YTST-216 | YTST-252 | ||
| Test Area Dim. W× H× D(mm) | 360× 350× 400 | 500× 400× 400 | 600× 400× 450 | 600× 600× 600 | 600× 700× 600 | ||
| External Dim. W× H× D(mm) | 1200× 1820× 1500 | 1430× 1950× 1600 | 1510× 1850× 1850 | 1510× 2050× 2000 | 1510× 2150× 2000 | ||
| High Temp. Range | +80º C---+200º C | ||||||
| Low Temp. Range | -10º C -- -40º C; -10º C ---60º C; -10--- -70º C | ||||||
| Test Temp. Range | +60º C-- +150º C; | ||||||
| -10º C--- -40º C; -10º C---55º C; -10º C--- -65º C | |||||||
| Ferformance | Temp. Constancy | ± 1º C | |||||
| Temp. Recover Time | 3 -- 5min | ||||||
| Heat-at Time | º C | 150 | 150 | 150 | 150 | 150 | |
| min | 30 | 40 | 40 | 40 | 40 | ||
| Pull-downTime | º C | -40 -50 -65 | -40 -50 -65 | -40 -50 -65 | -40 -50 -65 | -40 -50 -65 | |
| min | 60 70 80 | 60 70 80 | 80 90 100 | 90 100 110 | 100 110 120 | ||
| Material | Exterior | Stainless steel piate+Powder Coated | |||||
| Interior | SUS#304 stainless steel piate | ||||||
| Insulation | PU & Fiberglass wool | ||||||
| Systems | Cirulation | siroco fan | |||||
| Heating | Chrome steel strip wire heater | ||||||
| Cooling | Compressor+evaporator fins+air-cooling(or water-cooling)condenser | ||||||
| Controller | CLCD-9800 | ||||||
| Other Components | Control status indicator lights, experiment separation shelves(freely adjustable 2pcs) | ||||||
| Sevey Devices | Overheating prevention circuit-breaker, compressor overload protection, control system overload prevention, breakdown idicator lihgt, high-low compressure protection swith. | ||||||
| Power Source[K. W. ] | AC 3Ψ 380V 60/50Hz | ||||||
| Customization | Customization of inner chamber size, temperature range, etc. | ||||||
