Audited Supplier
PLR9363-LS
Cantilever Type
Resistance Strain
4-Wire
Analog Type
Corrosion Resistant
Normal Wirewound
Alloy Steel
IP68
ISO
Non-Customized
350±5Ω
10VDC
2mv/V
Rated Output 0.02%
SAIMO
Cardboard Box
1kg
China
Product Description
CERTIFICATE OF CONFORMANCE
CALIBRATION DATA Date: 12/15/24
Model:PLR9363-LS -100kg Cap:100kg S/N:31462 FSO:1.9998 mV/V
WIRING CODE: +Excitation: Red -Excitation: Black
+Signal: Green -Signal: White
SAFETY INSTRUCTIONS
To ensure sufficient overload capacity for the designed load,the dimensions of all mounting and structural elements have to be calculated.In particular,upright weighing objects(vessels and the like)have to be safeguarded against the weighting installation turning over or being shifted.
In the event of a break in suspension,load cell,or mounting part etc, representing a hazard to health and/or safety and/or damage to goods,additional safety devices are necessity.
CALIBRATION DATA Date: 12/15/24
Model:PLR9363-LS -100kg Cap:100kg S/N:31462 FSO:1.9998 mV/V
| Recommended Excitation | 10 VAC or DC | Compensated Temp. Range | -10 to 40ºC |
| Maximum Excitation | 15 VAC or DC | Operating Temp .Range | -20 to 60ºC |
| Output at Rated Load | 1.9998 mV/V | Zero Balance | ± 1.0% FS |
| Non Linearity | < 0.020% | Input Resistance | 385 ± 5Ω |
| Hysteresis | < 0.020% | Output Resistance | 350 ± 3Ω |
| Creep(30 minutes) | < 0.0300% | Insulation Resistance(50VDC) | > 5000MΩ |
| Non-Repeatability | < 0.010% FS | Deflection at Rated Load | < 1mm |
| Zero Return(30 minutes) | < 0.0300% | Safe Overload | 150 % |
| Temp.Effect/ºC on span | < 0.0015% | Ultimate Overload | 300 % |
| Temp.Effect/ºC on zero | < 0.0026% | Platform Size x cm | |
| Eccentricity %Load/cm | |||
WIRING CODE: +Excitation: Red -Excitation: Black
+Signal: Green -Signal: White
SAFETY INSTRUCTIONS
To ensure sufficient overload capacity for the designed load,the dimensions of all mounting and structural elements have to be calculated.In particular,upright weighing objects(vessels and the like)have to be safeguarded against the weighting installation turning over or being shifted.
In the event of a break in suspension,load cell,or mounting part etc, representing a hazard to health and/or safety and/or damage to goods,additional safety devices are necessity.
