Audited Supplier
9363
S Type
Resistance Strain
4-Wire
Analog Type
Corrosion Resistant
Integration
Alloy
IP68
ISO
Non-Customized
Ramsey
Cardboard Box
China
Product Description
RAMSEY
CERTIFICATE OF CONFORMANCE
CALIBRATION DATA Date: 06/19/23
Model:9326-500kg Cap:500kg S/N:33166162 FSO:3.0038 mV/V
Recommended Excitation 10 VAC or DC Compensated Temp. Range -10 to 40ºC
Maximum Excitation 15 VAC or DC Operating Temp .Range -20 to 60ºC
Output at Rated Load 2.9983 mV/V Zero Balance ± 1.0% FS
Non Linearity < 0.020% Input Resistance 385 ± 5Ω
Hysteresis < 0.020% Output Resistance 350 ± 3Ω
Creep(30 minutes) < 0.0300% Insulation Resistance(50VDC) > 5000MΩ
Non-Repeatability < 0.010% FS Deflection at Rated Load < 1mm
Zero Return(30 minutes) < 0.0300% Safe Overload 150 %
Temp.Effect/ºC on span < 0.0015% Ultimate Overload 300 %
Temp.Effect/ºC on zero < 0.0026% Platform Size x cm
Eccentricity %Load/cm
CERTIFICATE OF CONFORMANCE
CALIBRATION DATA Date: 06/19/23
Model:9326-500kg Cap:500kg S/N:33166162 FSO:3.0038 mV/V
Recommended Excitation 10 VAC or DC Compensated Temp. Range -10 to 40ºC
Maximum Excitation 15 VAC or DC Operating Temp .Range -20 to 60ºC
Output at Rated Load 2.9983 mV/V Zero Balance ± 1.0% FS
Non Linearity < 0.020% Input Resistance 385 ± 5Ω
Hysteresis < 0.020% Output Resistance 350 ± 3Ω
Creep(30 minutes) < 0.0300% Insulation Resistance(50VDC) > 5000MΩ
Non-Repeatability < 0.010% FS Deflection at Rated Load < 1mm
Zero Return(30 minutes) < 0.0300% Safe Overload 150 %
Temp.Effect/ºC on span < 0.0015% Ultimate Overload 300 %
Temp.Effect/ºC on zero < 0.0026% Platform Size x cm
Eccentricity %Load/cm
WIRING CODE: +Excitation: Red -Excitation: Black
+Signal: Green -Signal: White
+Signal: Green -Signal: White
SAFETY INSTRUCTIONS
To ensure sufficient overload capacity for the designed load,the dimensions of all mounting and structural elements have to be calculated.In particular,upright weighing objects(vessels and the like)have to be safeguarded against the weighting installation turning over or being shifted.
In the event of a break in suspension,load cell,or mounting part etc, representing a hazard to health and/or safety and/or damage to goods,additional safety devices are necessity.
To ensure sufficient overload capacity for the designed load,the dimensions of all mounting and structural elements have to be calculated.In particular,upright weighing objects(vessels and the like)have to be safeguarded against the weighting installation turning over or being shifted.
In the event of a break in suspension,load cell,or mounting part etc, representing a hazard to health and/or safety and/or damage to goods,additional safety devices are necessity.
