Audited Supplier
LZY-604
Online Service
12 Months
Wheel Tractor
Farm Tractor, Garden Tractor, Lawn Tractor, Hilly Tractor
ISO, CCC, ISO/TS16949
4WD
G3
Gas / Diesel
Large
Red/Black/Blue/Yellow/White/
New
Articulated
4X4
Tight Turning Radius
Superior Traction
Hight
All-Terrain Mobility
LZ
Iron Frame
60hp/70hp
China
87019011
Product Description
Bend-Back Tractor (Articulated Tractor) A bend-back tractor, also known as an articulated tractor or hinged-back tractor, is a versatile agricultural/utility vehicle designed for precision work in confined spaces. Its key features include:
Key Characteristics
1. Flexible Frame: The rear section folds forward (hinges upward), reducing overall width and height for navigating tight areas like gardens, forests, or construction sites.
2. Powerful Engine: Equipped with a robust diesel or gasoline engine, providing sufficient torque for heavy-duty tasks.
3. Adjustable Attachments: Compatibility with tools such as plows, harvesters, backhoes, mowers, or buckets for multipurpose use.
4. Steerable Wheels: Some models feature independent steering on the rear axles, enhancing maneuverability in challenging terrain.
5. Lightweight Design: Reduced weight compared to traditional tractors, minimizing soil compaction.
Common Uses
- Agriculture: Small-scale tillage, planting, or harvesting in narrow fields.
- Landscaping/Gardening: Digging holes, clearing brush, or mowing lawns in urban or suburban areas.
- Construction: Excavation, material transport, or site preparation in confined spaces.
- Forestry: Logging operations or trail maintenance in dense woodlands.
- Emergency Response: Disaster zones where accessibility is limited.
This design balances power and agility, making it ideal for operators needing precision and adaptability in tight environments.
| 604 Articulated Tractor | ||||
| Technical Parameter: | ||||
| Item | Unit | Designed value | ||
| Machine | Model | / | 604 | |
| Type | / | 4WD | ||
| Purpose | / | General purpose | ||
| Overall dimension(L*W*H) | mm | 3490× 1355×2190(Top ROPS) | ||
| Wheelbase | mm | 1410 | ||
| Wheel tread(Front wheel/Rear wheel) | mm | 960-1300/960-1300 | ||
| Normally used Wheel tread (Front wheel/Rear wheel) | mm | 1020/1020 | ||
| Min. ground clearance | mm | 250( Rear axle bottom) | ||
| Min. operation weight | kg | 1780 | ||
| Max. Ballast(front/rear) | kg | 0/56 | ||
| Gear(Forward, backward) | / | 8/2 | ||
| Theoretical speed of each gear | km/h | Forward:1.52, 2.24, 3.53, 4.86, 7.02, 10.36, 16.30, 22.46 Backward: | ||
| Connection mode of engine and clutch | / | Direct connect | ||
| Start mode | / | Electric start | ||
| PTO power | kW | 37.5 | ||
| Max. traction force | kN | |||
| Engine | Type | / | Inline, water cooled, four strokes | |
| Mode | / | 3G25TC-60G31C | ||
| Manufacture | / | CHANGCHAI | ||
| Intake mode | / | Turbocharged inter-cooled | ||
| Cylinder No. | / | 3 | ||
| Rated power | kW | 44.1 | ||
| Rated speed | r/min | 2300 | ||
| Steering system | Type of steering system | / | Bending steering | |
| Type of steering gear | / | Hydrostatic steering gear | ||
| Transmissio n system | Clutch type | / | Dry, single disc, constant joint | |
| Transmission type | / | Mechanical plane composition | ||
| Gearbox shift mode | / | The meshing sleeve shifts gears | ||
| Tire mode(Front/rear) | / | 13.2-16(9.5-16)/13.2-16(9.5-16) | ||
| Tire Pressure (Front/Rear) | kPa | 80~120/80~120 | ||
| Working device | Hydraulic suspension system type | / | separated type | |
| Suspension device mode | / | Rear mounted, three point linkage | ||
| Suspension device category | / | 1 category | ||
| Hydraulic oil pump type | / | Gear pump | ||
| Hydraulic output | / | One group | ||
| Full opening pressure of relief valve | MPa | 18±0.5 | ||
| PTO mode | / | Rear mounted, semi-independent | ||
| PTO spline | / | 6 | ||
| PTO spline OD | mm | Φ35 | ||
| PTO speed | r/min | 540/760( 540/1000 or 720optional) | ||
