Audited Supplier
MX-101-2
Third Party Support
12 Months
Walking Tractor
Farm Tractor
ISO, CE, EPA, CCC, EEC
2WD
Euro II
Gas / Diesel
6-10 Years
Small
Green
New
Agriculture
Multi, Such as Tilling, Ploughing and So on
Pull and Drive
Water Cooled Radiator Type
6.00-12
800-1100mm
Single Share Plough or Double Share Plough
MINGSIN
Plywood Case
ISO9000
China
87011000
Product Description
DETAILED DESCRIPTION:
The MINGSIN Brand walking tractor / power tiller / Two-wheel tractor Model MX-101B is of dual-function type that can be used as a means of traction as well as drive. Compared to the MX-101, it has the speed changing lever of high speed and low speed. It is featured by its simple and compact structure, good reliability, long service life, easy operation, ample output, light weight and good cross-country ability. And the gear-box is in horizontal type which may lead to better equilibrium ratio. It is very suitable for use in paddy fields, dry fields, orchards, vegetable gardens and hilly land with a little inclination.
It can be used for plough rotary tilling, harrowing in paddy fields, harvesting, drilling, ditching, transportation and etc. If suitable farm implements or accessories are attached. In addition, it can also be extensively used as a stationery power source for small scale drainage and irrigation, sprinkling, grain threshing, cotton ginning, flour milling, fodder cutting and so on.
TECHNICAL SPECIFICATIONS:
Our Services:
Department Introduction of QC / Technical Support:
In order to get super quality, we have special QC department to control the product quality. This department is composed by experienced engineers who can offer us strong technical support easily. The engineers will inspect product quality both in order production and after order production to make sure each shipment we send to our customers is in the best status. With their strict quality control, our consistent quality wins us more and more orders from our international customers.
QC Flow:
1.Material inspection before production to avoid any potential problem from the very beginning.
2. Inspection for half-finished products during order production to find the problem earlier if any;
3. Inspection for finished products after production to make sure the products comply with customer's requirement.
Full Service and Product Warranty:
We offer our customers technical assistance and a full one year warranty on all products covering all manufacturing defects. ME Our manufacturing facilty is completely computerized to provide our customers efficiency, reliability, high quality and timely shipments. Spare Parts:We can supply spare parts within 15 business days or sooner. Currently, part numbers are not available on-line. You may however determine the part number from your Parts Book or, if it is a simple part, you may describe the part and send us an order online. If you are not sure,
please Contact Us . Shipment: We can ship from our port in Qingdao or Shanghai, China to anywhere in the world within short days.
FAQ:
Q1: Are you a factory or trading company?
We have our factory for the farm machines and we also have our own trading company with self-supported import and export right.
Q2: How can I trust on your company?
We are a fully registered manufacture and exporting company by China Export Registration Authorities. Moreover, our products have been exporting to a number of countries including Switzerland, Russia, Spain, Netherlands, Australia, Peru, Thailand, Pakistan, Indonesia, Tanzania, Nigeria, South Africa, Sudan, Congo etc.
Q3: Where is your factory located? How can I visit there?
Our factory is located in Linyi City, Shandong Province, China. About 1 hour away from Linyi Airport, 4 hours away from Qingdao airport. All our clients are warmly welcomed to visit us!
Q4: How can I place an order from your website?
It is very easy.Once you find the implement you need on our website and place an inquiry against it, or, get to the inquiry section and leave us a message there with name, country and phone number, we will get in touch with you at the earliest.
Q5: How can I make the payment?
Payment is made via Telegraphic Transfer (T/T) through the bank against the proforma invoice.
30% as prepayment and the balance when the goods are ready for shipping.
Q6: What's the Payment terms?
T/T, L/C or some other ways payment method.
Q7: At which port do you usually ship the good?
We usually ship goods via Qingdao port of China.
Q8. How about the Warranty ?
12 months warranty from the time of the goods arrive at destination.
The MINGSIN Brand walking tractor / power tiller / Two-wheel tractor Model MX-101B is of dual-function type that can be used as a means of traction as well as drive. Compared to the MX-101, it has the speed changing lever of high speed and low speed. It is featured by its simple and compact structure, good reliability, long service life, easy operation, ample output, light weight and good cross-country ability. And the gear-box is in horizontal type which may lead to better equilibrium ratio. It is very suitable for use in paddy fields, dry fields, orchards, vegetable gardens and hilly land with a little inclination.
It can be used for plough rotary tilling, harrowing in paddy fields, harvesting, drilling, ditching, transportation and etc. If suitable farm implements or accessories are attached. In addition, it can also be extensively used as a stationery power source for small scale drainage and irrigation, sprinkling, grain threshing, cotton ginning, flour milling, fodder cutting and so on.
TECHNICAL SPECIFICATIONS:
| Model | Unit | MX-101-2 | |
| Structure weight | Without rotavator | kg | 238 |
| With rotavator | 291 | ||
| Working weight (with rotavator) | kg | 331 | |
| Overall dimensions (LxWxH) | mm | 2170x845 x 1150 | |
| Number of blades | PCS | 14 | |
| Rototilling width | mm | 700 | |
| Type of tractor | Single axle, dual-purpose for both traction & drive | ||
| Gears type | low and high speeds | ||
| Travelling speed | Forword | Km/h | 1.98, 3.08, 4.98, 8.04, 12.49, 20.2 |
| Reverse | 1.53, 6.18 | ||
| Type size | 6.00-12 | ||
| Wheel track | mm | 680~740(adjustable) | |
| Min. ground clearance | mm | 210 | |
| Min. turning radius | m | 0.71 (without rotavator) | |
| Model of engine | 190N | ||
| Type of engine | Horizontal 4-stroke | ||
| Bore x stroke | mm | 90× 90 | |
| Total displacement | L | 0.573 | |
| Compression ratio | 21: 01 | ||
| Turing speed of crankshaft | rpm | 2300 | |
| 1-hour rated output | KW/hp | 7.7/10.5 | |
| 12-hour rated output | KW/hp | 7.0/9.5 | |
| Specific fuel consumption | g/kw. h | ≤ 273.4 | |
| Specific lube oil consumption | g/kw. h | ≤ 2.72 | |
| Cooling mode | Condenser (Radiator) | ||
| Main farm implements (optional) | Anti-skid steel wheel Model 100-640 Single-furrow plough Model 1LS-125 Turnover plough Rotary tiller Model MX80D-1 Sprinkler Model 50BPZ-45 Swather/reaper Model 4GL-100 Trailer 7C-0.8 (Standard) | ||
Our Services:
Department Introduction of QC / Technical Support:
In order to get super quality, we have special QC department to control the product quality. This department is composed by experienced engineers who can offer us strong technical support easily. The engineers will inspect product quality both in order production and after order production to make sure each shipment we send to our customers is in the best status. With their strict quality control, our consistent quality wins us more and more orders from our international customers.
QC Flow:
1.Material inspection before production to avoid any potential problem from the very beginning.
2. Inspection for half-finished products during order production to find the problem earlier if any;
3. Inspection for finished products after production to make sure the products comply with customer's requirement.
Full Service and Product Warranty:
We offer our customers technical assistance and a full one year warranty on all products covering all manufacturing defects. ME Our manufacturing facilty is completely computerized to provide our customers efficiency, reliability, high quality and timely shipments. Spare Parts:We can supply spare parts within 15 business days or sooner. Currently, part numbers are not available on-line. You may however determine the part number from your Parts Book or, if it is a simple part, you may describe the part and send us an order online. If you are not sure,
please Contact Us . Shipment: We can ship from our port in Qingdao or Shanghai, China to anywhere in the world within short days.
FAQ:
Q1: Are you a factory or trading company?
We have our factory for the farm machines and we also have our own trading company with self-supported import and export right.
Q2: How can I trust on your company?
We are a fully registered manufacture and exporting company by China Export Registration Authorities. Moreover, our products have been exporting to a number of countries including Switzerland, Russia, Spain, Netherlands, Australia, Peru, Thailand, Pakistan, Indonesia, Tanzania, Nigeria, South Africa, Sudan, Congo etc.
Q3: Where is your factory located? How can I visit there?
Our factory is located in Linyi City, Shandong Province, China. About 1 hour away from Linyi Airport, 4 hours away from Qingdao airport. All our clients are warmly welcomed to visit us!
Q4: How can I place an order from your website?
It is very easy.Once you find the implement you need on our website and place an inquiry against it, or, get to the inquiry section and leave us a message there with name, country and phone number, we will get in touch with you at the earliest.
Q5: How can I make the payment?
Payment is made via Telegraphic Transfer (T/T) through the bank against the proforma invoice.
30% as prepayment and the balance when the goods are ready for shipping.
Q6: What's the Payment terms?
T/T, L/C or some other ways payment method.
Q7: At which port do you usually ship the good?
We usually ship goods via Qingdao port of China.
Q8. How about the Warranty ?
12 months warranty from the time of the goods arrive at destination.
