Audited Supplier
BYDLC30KE
CE
New
Customized
Stainless Steel
3.5 mm
3.5MPa
Rear Trigger
Garden Gun, Paint Spray Gun, Washing Gun, Hopper Gun
0~30kN
280
350
124
High Pressure Gun
Reciprocating Type
Pulse Pneumatic Wrench
Construction Machinery
Cp
Semi-Automatic
Under Pressure
BIEDAS
Box Package
76*158cm
China Jiangsu
8423900000
Product Description
Built-in electronics Impact Hammer
BYDLC05KE is designed to excite and measure impact forces on small to medium structures such as engine blocks, car frames and automotive components. It features built-in electronics . A dynamic force sensor is used to measure the response of the structure. By using analyzing system, the frequency response function and mode shapes of the test structure can then be derived. Contrary to using an electrodynamic exciter, an impact hammer does not apply additional mass loading to the test object and it provides a very portable solution for excitation.Impact Hammer
Features:
Impact force-electric conversion device
Structural vibration mode measurement with hammer method
Modal analysis measurement
Main Specifications:Specifications:
| Index | BYDLC30KE |
| Force sensor sensitivity(IEPE) | ~0.167mV/N |
| Maximum momentum | 0~30KN |
| Additional buffered frequency response | See the graph for details |
| Hammer head diameter (mm) | Φ30 |
| Hammer handle length (mm) | 280 |
| Mass of hammer head (g) | 350 |
| Mass of additional hammer head (g) | 124 |
| Iinearity | ≤1%F·S |
| Repeatability | ≤1%F·S |
| Excitation voltage | +18~28V |
| Constant current | 2~10mA |
| Resonant frequency | >40kHz |
| operating temperature range | -54~+80ºC |
| Sensitive material | Quartz |
| Sensor cable | 2 Meters(BNC/L5) |
| Model(IEPE) | BYDLC00KE | BYDLC02KE | BYDLC05KE | BYDLC30KE | BYDLC60KE |
| Sensitivity(mV/N) | ~25 | ~2.5 | ~1 | ~0.167 | ~0.088 |
| Model(PE) | BYDLC00K | BYDLC02K | BYDLC05K | BYDLC30K | BYDLC60K |
| Sensitivity(pC/N) | ~4 | ~3.5 | ~3.5 | ~2 | ~2 |
| Max. Shock Force | 200N | 2KN | 5KN | 30KN | 60KN |
| Attached buffer frequency response | Refer to the graph below | ||||
| Head Diameter(mm) | Φ17 | Φ17 | Φ30 | Φ30 | |
| Length of handle(mm) | 110 | 240 | 240 | 280 | 280 |
| Head Weight(g) | 3.7 | 61.5 | 61.5 | 350 | 350 |
| Buffer Heads (hammer caps) Weight(g) | Stainless Steel:~13.8 Aluminum:~15.5 Rubber:~14.7 Nylon:~13.9 | Stainless Steel:~61.5 Aluminum:~74.2 Rubber:~69.2 Nylon:~68.4 | |||
