Audited Supplier
OS003
NBR
Engine
Valve Oil Seal
Pressure Type
Nonstandard
30days
Hydraulic
Silver/Yellow
xintai
Plastic Tube+Carton+Wooden Pallets
as your demand
China
Product Description
The oil seal structure of small household appliances consists of three parts: oil seal body, reinforcing frame and self tightening coil spring. According to different parts, the sealing body is divided into bottom, waist, edge and sealing lip. Generally, the inner diameter of the skeleton oil seal in free state is smaller than the shaft diameter, that is to say, it has a certain "interference". Therefore, when the oil is sealed on the oil seal seat and shaft, the pressure of the oil seal blade and the shrinkage force of the self tightening coil spring will produce a certain radial tightening force on the shaft. After a period of operation, the pressure will rapidly reduce or even disappear, so, the spring can compensate the self tightening force of the oil seal at any time.
Material | PTFE |
Temperature(ºC) | -30~+220°C |
Pressure | 2 MPA |
Medium | Mineral oil based, hydraulic fluids,water |
size | 8*15*5 |
Standard or Nonstandard | standard/Customize |
Application | Hydraulic Cylinder |
Installation
During installation, some lubricant must be applied to the sealing ring, and at the same time, ensure that the framework oil seal is perpendicular to the axis line. If it is not vertical, the sealing lip of the oil seal will drain the lubricating oil from the shaft, which will also cause excessive wear of the sealing lip. In operation, the lubricant in the shell seeps out a little bit, so as to achieve the best state of forming oil film at the sealing surface.
Advantages
1. Particularly strong wear resistance. 2. Insensitivity to shock loads and pressure peaks. 3. High crush resistance. 4. It has an ideal sealing effect under no load and low-temperature conditions. 5. Suitable for demanding working conditions. 6. Easy to install.
Q1. Are you factory or trading company?
A:We are a manufacturer with independent import and export rights.
A:We are a manufacturer with independent import and export rights.
Q2. How is the quality of your products?
A:At this point, you can rest assured that we have a complete production management system with a high product qualification rate and will conduct quality inspections on the products produced.
Q3. What is your advantage?
A:Our advantage lies in strong control of product quality, strong productivity, short delivery cycle, etc.
Q4: Do you have products in stock?
Yes, for most porducts, we have.
Yes, for most porducts, we have.
