Designed with a compact turning radius, the equipment effortlessly navigates tight spaces, ensuring seamless entry and exit in confined areas.
Boasting a maximum shotcreting capacity of 20m³/h, the UPS-20J exemplifies exceptional shotcreting efficiency and is engineered to prevent pipe blockages, ensuring consistent performance.
Featuring a versatile diesel and electric dual system, the vehicle ensures uninterrupted construction progress with electric operations and a diesel backup for emergency scenarios.
The UPS-20J benefits from an optimized and enhanced structural design, resulting in a low failure rate. This design also ensures high compatibility with various accessories and consumables, significantly reducing operational costs.
Advanced wireless remote control operation facilitates precise management of the mechanical arm, delivering rapid, efficient, safe, and energy-saving performance.
Fitted with a 400L accelerator tank, the UPS-20J meets the volumetric demands of large-scale construction sections effortlessly.
Max mumoveralldimension(L×W×H) | 7830×2000×2520mm |
Self-weight | 12.5t |
Operatingmode | Electric system + diesel engine emergency response system |
Operatingrange(W×H) | 15×8.5m |
Maximumshotcretingvolume | 20m³/h |
Controlmode | The boom adopts wireless remote control |
Chassis model | Self-made engineering vehicle chassis |
Power | 110kW |
Wheelbase | 3540mm |
Maximum travel speed | 17km/h |
Maximum gradeability | 25° |
Minimum outer turning radius | 6301mm |
Minimum inside turning radius | 3768 mm |
Minimum ground clearance | 408mm |
Structural form of boom | Three-section arm two-stage telescopic |
Maximum spray height | 8.5m |
Maximum spray width | 2×7.5m |
Boom pitch angle | -30°~+50° |
Boom slewing angle | 0~270° |
Axial rotation of spray nozzle seat | 360° |
Axial swing of spray nozzle seat | 240° |
Deflection angle brushing of spray nozzle | 8° ×360° continuous |
Total motor power | 45kW |
Number of cylinders | 2 |
Cylinder (cylinder diameter X stroke) | 90mm×800mm |
Concrete cylinder (cylinder diameter × stroke) | 160mm×800mm |
Pumping line | 125-80 reducer pipe |
Maximum size of sprayed aggregate | 25mm |
Maximum pumping volume | 20m³/h |
Hopper capacity | 0.35m³ |
Material receiving height | 1310mm |
Air compressor displacement | 10.5m³/min,45kW |
Working pressure of air compressor | 0.7MPa |
Admixture system displacement | 620L/h |
Admixture system pressure | 1MPa |
Volume of accelerator tank | 400L |