Audited Supplier
Pole Bracket/Pole Bank
Specifications
Model Number: Pole clamp type CA, GCA, DEG
Usage: Power distribution equipment
Material: Metal, Steel
Structure: Saddle Clamp
Standard or Nonstandard:Standard
Certificate: ISO9001,CCT
Pole band structure:
Rax Industry pole band structure is simple. There are two pieces of steel bands in one set. Bolts will fasten the two pieces through the hole on each end leg. This way, the pole band clamp will not drop off from the pole.
For the single offset pole band, there is an outstanding square part in the middle of one piece pole band. On the other piece of single offset pole band, there is no hole in the half-round band. This outstanding part is designed for bolts to go through. This bolt will connect the guy clamp or other pole line hardware. For the double offset pole band, it can support two lines, because, on each half round band, there is an outstanding square part in the middle.
Basic Data| Type | Stock No. | Clamp Range | Width mm | Gauge mm | ||
| Dimension Inch (mm) | Range (mm) | Inch | ||||
| RL | C0150H-08 | 8(203) | 178-203 | 7-8 | 64/50 | 8/6 |
| C0150H-09 | 9(229) | 203-229 | 8-9 | |||
| C0150H-10 | 10(254) | 229-254 | 9-10 | |||
| C0150H-11 | 11(279) | 254-279 | 10-11 | |||
| CA | C0150H-08 | 8(203) | 178-203 | 7-8 | ||
| C0150H-09 | 9(229) | 203-229 | 8-9 | |||
| C0150H-10 | 10(254) | 229-254 | 9-10 | |||
| DEG | C0150H-08 | 8(203) | 178-203 | 7-8 | ||
| C0150H-09 | 9(229) | 203-229 | 8-9 | |||
| C0150H-10 | 10(254) | 229-254 | 9-10 | |||
| GCA | C0150H-08 | 8(203) | 178-203 | 7-8 | ||
| C0150H-09 | 9(229) | 203-229 | 8-9 | |||
| C0150H-10 | 10(254) | 229-254 | 9-10 | |||
The pole band is used to wrap on the pole, it is also named pole fastener, pole fastening clamp, pole band clamp, and pole bracket. According to the structure, the pole band includes single offset pole band and double offset pole band.
According to the application, there are utility pole bands, telephone pole brackets, and cable pole bands. Pole fastening clamps can be used with guy wires. The cable pole band can be commonly used to connect the ADSS and OPGW cable. There is an extended leg on one piece of pole band. The hole on the extended leg will connect the ZH clevis, and U clevis.
A pole band is designed to be suitable for use on poles of pole top diameters of 150mm to 280mm. We have supplied a diameter of 155mm, 185mm, 230mm, and so on.
The pole band has a stay tension strength not exceeding 29kn. While the result will be different if a gain grid or some other device is used to transfer the shear load from the pole bolt.
Rax Industry pole band raw material is flat carbon steel, not slitting steel. The raw material is soft and highly malleable. The carbon steel tensile strength is up to 560N/MM2. With the strict selection of the raw material, there will be no broken or cracks on the pole band, after stamping on the flat steel.
The finish of the Rax Industry pole band is hot-dip galvanized according to ISO 1461.
For different pole diameters and voltages, there are different sizes for the pole band clamp. As a leading manufacturer and supplier, Rax Industry can support all sizes of pole bands, we can also make the pole fasteners according to your design.
