Audited Supplier
PLM-SI5600
20L-50L
Irrigation
Pump
Pressure
Plastic
External Thread Connection
Home Gardening
Flowers
Circular
PLM
Poly Bag + Standard Export Carton
6mm*3/16unc
China
8479902000
Product Description
Brass Misting Nozzles Cooling Nozzle with Slip Lock Tee Connector for Garden Greenhouse Irrigation
The misting nozzle is made of a sturdy brass with stainless steel orifice.anti-rust, durable, leak-proof, precision.Widely applied for garden, patio, greenhouses, spraying disinfectant, dust.removal, landscaping, lawn misting systems, artificial fog and other humidification place.
The misting nozzle can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage.The nozzle heads can be easily screwed into any 10/24 UNC threaded mist nozzle opening. A self-sealing O-ring is included with each nozzle, making it leak-proof.
Flow rate : 80-145ml/min.
Thread size : UNC 10-24;
Orifice diameter : 0.1mm to 0.8mm;
Pressure: 30-450psi (20-70kg/cm);
Features:
The fine atomizing nozzle uses a brass body with stainless steel core guide vanes. The liquid forms a centrifugal vortex in the guide vanes. The fine hollow mist particles are sprayed from the nozzle holes, which can be widely used in the humidification and cooling of the plant. , Disinfection, dust reduction, landscaping, salt spray test and other artificial fog, this nozzle is made by American precision punching machine, the hole diameter is 0.3mm, well-made, the use cost is more than 10 times less than that of air humidification .
Flow rate : 80-145ml/min.
Thread size : UNC 10-24;
Orifice diameter : 0.1mm to 0.8mm;
Pressure: 30-450psi (20-70kg/cm);
Features:
The fine atomizing nozzle uses a brass body with stainless steel core guide vanes. The liquid forms a centrifugal vortex in the guide vanes. The fine hollow mist particles are sprayed from the nozzle holes, which can be widely used in the humidification and cooling of the plant. , Disinfection, dust reduction, landscaping, salt spray test and other artificial fog, this nozzle is made by American precision punching machine, the hole diameter is 0.3mm, well-made, the use cost is more than 10 times less than that of air humidification .
Model Number | PLM-SI5600 |
Material | Plastic + Brass |
Product Name | Brass Misting Nozzles Cooling Nozzle with Slip Lock Tee Connector |
Nozzles Orifice | 0.5mm |
Connection size | Fit to 6mm OD tubing and 10/24'' female thread nozzle |
Working Pressure | 2~3 KG |
