Audited Supplier
KDEQ-003
24-Hour Online Service
One Year
Busbar Inspection
Busbar Inspection
Linear Control
Closed-Loop Control
CNC/MNC
0.09~0.1(mm)
Economical CNC Machine Tools
ISO 9001
New
Kiande
Plywood Case
Length: 12m
China, Suzhou
Product Description
Automatic inspection machine for busway system / High voltage test machine for busduct / Insulation tester for busbar trunking system
Automatic inspection machine is composed of three parts, feeding positioning station, inspection station and discharge station. When the busbar enters the feeding position, the control system will select the right testing fixture to start testing from the information identified by bar code or previous assembly line. Three tests will be performed including HV withstanding test, insulation resistance test and grounding test. After test is finished, testing report will be generated. This report can be saved, printed on site and recorded remotely. Its format can be set according to customer's requirements. Automatic inspection machine is mainly used for batch inspecting on the straight busbar. Elbow busbar type shall be tested on manual inspection machine.
Specification of busbar inspection machine
Clarification:
1) The equipment can satisfy the busbar production of the following busbar specification.
2) Current ratings: 630A~2500A(Single layer busbar)
3) Phase and wire: 3P3W, 3P4W, 3P5W.
4) Busbar length suited to be inspected: 1.5m to 6m
5) Equipment working efficiency: 3min/piece
6) Equipment length: 12m
Supply range and service
1) One set of automatic patching machine and one set of automatic inspection instrument.
2) One set of busbar automatic inspection electrical control system.
3) One set of technical Data including installation, commissioning, use, maintenance and operation.
4) Equipment operation manuals.
5) Equipment electrical schematics.
Automatic inspection machine is composed of three parts, feeding positioning station, inspection station and discharge station. When the busbar enters the feeding position, the control system will select the right testing fixture to start testing from the information identified by bar code or previous assembly line. Three tests will be performed including HV withstanding test, insulation resistance test and grounding test. After test is finished, testing report will be generated. This report can be saved, printed on site and recorded remotely. Its format can be set according to customer's requirements. Automatic inspection machine is mainly used for batch inspecting on the straight busbar. Elbow busbar type shall be tested on manual inspection machine.
Specification of busbar inspection machine
| No. | Parameters |
| Model | KD-JCX/NC-E/H-6 |
| Busbar Height | 100mm~650mm |
| Busbar Length | 1200mm~6000mm |
| Busbar Type | Straight length type |
| Position Type | Unilateral / Middle |
| Working Efficiency | 2 min/piece(testing time is adjustable.) |
| Servo Nos | 2 axis( Z axis/X axis) |
| Vision System | Phase error judgment( optional) |
| Printing System | Bar code printing/ Report printing( optional) |
| High Voltage Withstanding Test | 0~5000V |
| Insulation Test | 1~1000V |
| Grounding Test | 0~25A |
| Power | 380~415VAC 50~60Hz 5kW |
| Equipment Dimension | L12000mm*W1200mm*H1900mm |
1) The equipment can satisfy the busbar production of the following busbar specification.
2) Current ratings: 630A~2500A(Single layer busbar)
3) Phase and wire: 3P3W, 3P4W, 3P5W.
4) Busbar length suited to be inspected: 1.5m to 6m
5) Equipment working efficiency: 3min/piece
6) Equipment length: 12m
Supply range and service
1) One set of automatic patching machine and one set of automatic inspection instrument.
2) One set of busbar automatic inspection electrical control system.
3) One set of technical Data including installation, commissioning, use, maintenance and operation.
4) Equipment operation manuals.
5) Equipment electrical schematics.
