Audited Supplier
CB KC SAA 12V 1.5A AC Power Adapter 18W Power Supply Model:FY0182940600
Input:AC100-240Vac
Output:12V 1.5A ( tailor make within 5-42V 0.1-3A)
Certified:CE FCC ULCB KC KCC PSE GS CCC SAA UKCA EAC Rohs
Size:77.5*41.8*29mm
Key model: 12V 1.5A ,12.6V 1A ,29.4V 0.6A ,42V 0.4A
AC plug: US/EU/PSE/Korean/ and any other for client request
DC connector: DC5521/5525/mitou/m16/GX12/ ( tailor make any others for client request)
Protection
1.Over-voltage protection: 120%min
2.Over-current protection: 120%min
3.Short-circuit protection: automatic recovery
4.over protection
5.Load regulation: ±5%
Advantage of the product
1. Range voltage: AC 90-264V 47/63HZ
2. High efficiency and low operation temperature
3. AC input power suitable for the world
4. Soft-start current can reduce the AC input impact efficiency
5. Compact size ,light weight
6. With short-circuit and overload protection
7.100%full-load burning test
8. Installed with EMI filter ,minimum wave
Input Current Limiting
The input current should be less than 0.8A, under minimum AC inpug and full load.
Maximum Energy Consumption in NO-Load
The input power shall be less than 1W at 115/230V ac input
Efficiency
The power supply efficiency shall be greater than 78% under rated inpug voltage. It will be measured at the typical load and maximum load.
Standard
Meet EN61558,60950-1( information technology and similar electric apparatus safety requirement) standard requirement.
This product can be repaired within one year for any defects or irregularities caused by the factory.
100pcs/ctn,PE bag,or as your demand
We are a professional adapters and charger factory for more than 11 years
Quality control:our defective products rate is 0.01%
Economically priced, exquisitely made Experience&responsible QC that you can reply on
Adequate supply capacity, Punctual delivery time
Best after sales service are provided
CERTIFICATION
1.PAYMENT: T/T,30% DEPOSITE,70% BEFORE SHIPMENT
2.SAMPLES: 1-5PCS EACH
3.MENAS OF TRANSPORTATION: DHL,or UPS or FedEx or BY AIR or BY SEA,AS YOUR DEMAND
4.LEAD TIME: 3-5 WORKING DAYS FOR SAMPLES
20 DAYS FOR MASS PRODUCTION
