Audited Supplier
Angle Type Control Valve and globe straight control have similar internal structures, the only difference is the valve body type. Its flow path is simple, it can effectively prevent the blocking of the medium, meanwhile, the flow resistance is small. It is suitable for a medium of high viscosity or a medium containing particles.
Features:
This type can be used for high-pressure conditions and is capable of conditions with slurry polymer crystals and high-temperature fluid.
Benefits:
Angle Type Control Valve can prevent fluid cavitation and flash, and reduce noise and erosion of valve trim due to high flow velocity. And it has good control of slurry and viscous fluid including particles and impurities and a wide application in high temperature, high pressure, and hydrogen device. Butterfly spring dynamic sealing is used to be in full compliance with the requirements of the clean air act to guarantee a good sealing effect.
Structure:
| 1 | Body | 7 | Disc |
| 2 | Seat Gasket | 8 | Stem |
| 3 | Seat | 9 | Packing Spring |
| 4 | Guide Sleeve | 10 | Packing |
| 5 | Bonnet Gasket | 11 | Packing Follower |
| 6 | Bonnet | 12 | Packing Flange |
Specification:
| Nominal Diameter (mm) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | |
| Rated Flow Coefficient | Linear | 6.9 | 11 | 17.6 | 27.5 | 44 | 69 | 110 | 176 | 275 | 440 | 690 |
| Equal Percentage | 6.3 | 10 | 16 | 25 | 40 | 63 | 100 | 160 | 250 | 400 | 630 | |
| Rated Travel (mm) | 16 | 25 | 40 | 60 | ||||||||
| Nominal Pressure | PN16~PN100, CL150~CL600 | |||||||||||
| Flow Characteristic | Linear, Equal Percentage | |||||||||||
| Rangeability | 50:1 | |||||||||||
| Pneumatic Actuator | Direct-Acting (PDTC) | PM280B | PM400B | PM650B | PM1000B | |||||||
| Reverse-Acting (PDTO) | PM280K | PM400K | PM650K | PM1000K | ||||||||
| Diaphragm Area (cm2) | 280 | 400 | 650 | 1000 | ||||||||
| Spring Range (KPa) | 20~100, 40~200, 80~240 | |||||||||||
| Air Pressure (MPa) | 0.14, 0.25, 0.28, 0.4 | |||||||||||
| Accessories | Positioners, I/P Transducers, Volume Boosters, Position Transmitters, Limit Switches, Solenoid Valves, Handwheels, etc. are optional | |||||||||||
*For important details such as size and weight, please feel free to contact the sales engineer.
Performance:
| Process Variability | Pneumatic Control Valve | |
| Ordinary Temp | Low Temp, High Temp | |
| Intrinsic Error <(%) | ±1.0 | ±2.5 |
| Hysteresis Error <(%) | 1.0 | 2.5 |
| Deadband <(%) | 0.4 | 1.0 |
| Start and End Position Deviation<(%) | ±1.0 | ±2.5 |
| Rated Travel Deviation<(%) | +2.5 | +2.5 |
Six Factors For JIANENG Sustainable Development
Q: Are you a manufacturer or a trading company?
A: We are a manufacturer located in Hangzhou City, Zhejiang Province, China.
Q: What brand of your company can supply?
A: JIANENG or OEM service.
Q: Do you accept customized orders?
A: YES! We can supply customized valves.
Q: Is there have MOQ?
A: No. We can accept 1 set, but there has an additional cost of $150.00(the process of export) if the order value is within $2000.00.
Q: What are your payment terms?
A: As per our company's policy, we usually have below 3 payment terms, we also can negotiate with both parties before confirming the order.
1) 100% T/T or West Union in advance that order value is within $ 2,000.00 USD.
2)30% T/T advance+70% balance before the shipment for the order value above $2,000.00USD.
3)L/C at sight for the order value above $ 50,000.00 USD.
Q: Can you give me a discount?
A: As you know, we are the manufacturer, so please trust us that our prices are competitive. If the quantity is large, we can consider giving you a discount.
Q: How about the delivery schedule?
A: Delivery schedule depends on product type. Therefore, please consult with the sales team for a specific delivery schedule when you inquire quote. The company is making an effort to keep the delivery schedule, which is the promise to the customer. The company will improve your satisfaction by delivering the necessary product as soon as possible.
Q: What is the valve warranty?
A: Our valve warranty period should be 18 months from the date of shipment or 12 months after installation, whichever occurs first.
Q: Do you have any valves in stock?
A: There have several series of valves in stock, and they can be delivered within two weeks. You can consult the sales staff for details.
