Audited Supplier
F3000, F5000
7*24
18 Months
AC Elevator
450-2500kgs
6-25
0.75-4.0m/S
Collective Selective Control
Mr or Mrl
Center Opening Door
Single
Without Deceleration Device
Without Attendant
CE, Eac, ISO
Monarch, Step, Customized
Support
Wittur, Fermator, Nbsl, Yongda
E30, Ei30, Ei60, Ei120, No
MACRO
by Sea
China
84281010
Product Description
Small machine room passage elevator
In order to save space space and make the building more elegant and beautiful. MACRO small machine room passenger elevator adopts a compact permanent magnet synchronous gearless traction machine and a specially design control cabinet.
According to our design, it saves machine room space up to 56%.
According to our design, it saves machine room space up to 56%.
Machine roomless passenger elevator
With the deep understanding of the concept of the environment protection, energy saving and consumption reduction, saving construction area, and improving the degree of the freedom of design. MACRO machine roomless elevator fully embodies the spirit of green humanisam. The elevator only needs an independent shaft space and no machine room. Compare with traction elevators with the same load, it saves up to 40% of electric energy and 10% of building
area.
With the deep understanding of the concept of the environment protection, energy saving and consumption reduction, saving construction area, and improving the degree of the freedom of design. MACRO machine roomless elevator fully embodies the spirit of green humanisam. The elevator only needs an independent shaft space and no machine room. Compare with traction elevators with the same load, it saves up to 40% of electric energy and 10% of building
area.
Landing Doors
Ceiling Floor Shaft Layout (machine room type)
| Load Capacity (kg) | Speed (m/s) | CW*CD*CH (mm) | OP*OPH (mm) | HW*HD (mm) | OH (mm) | PH (mm) |
| 630 | 1.0 | 1300*1250*2500 | 800*2100 | 2000*1800 | 4450 | 1500 |
| 1.5 | 4500 | 1550 | ||||
| 1.75 | 4600 | 1600 | ||||
| 800 | 1.0 | 1400*1350*2500 | 800*2100 | 2000*2050 | 4450 | 1500 |
| 1.5 | 4500 | 1550 | ||||
| 1.75 | 4600 | 1600 | ||||
| 2.0 | 4750 | 1700 | ||||
| 1000 | 1.0 | 1600*1450*2500 | 900*2100 | 2200*2200 | 4450 | 1500 |
| 1.5 | 4500 | 1550 | ||||
| 1.75 | 4600 | 1600 | ||||
| 2.0 | 4750 | 1700 | ||||
| 1050 | 1.0 | 1600*1500*2500 | 900*2100 | 2200*2200 | 4550 | 1550 |
| 1.5 | 4700 | 1600 | ||||
| 1.75 | 4750 | 1650 | ||||
| 2.0 | 4800 | 1750 | ||||
| 1150 | 1.0 | 1600*1600*2500 | 1000*2100 | 2300*2200 | 4550 | 1550 |
| 1.5 | 4700 | 1600 | ||||
| 1.75 | 4750 | 1650 | ||||
| 2.0 | 4800 | 1750 | ||||
| 1350 | 1.0 | 1750*1700*2500 | 1100*2100 | 2450*2400 | 4550 | 1550 |
| 1.5 | 4700 | 1600 | ||||
| 1.75 | 4750 | 1650 | ||||
| 2.0 | 4800 | 1750 | ||||
| 1600 | 1.0 | 1900*1800*2500 | 1100*2100 | 2600*2500 | 4550 | 1550 |
| 1.5 | 4700 | 1600 | ||||
| 1.75 | 4750 | 1650 | ||||
| 2.0 | 4800 | 1750 |
Shaft Layout (machine roomless type)
| Load Capacity (kg) | Speed (m/s) | CW*CD*CH (mm) | OP*OPH (mm) | HW*HD (mm) | OH (mm) | PH (mm) |
| 630 | 1.0 | 1100*1400*2500 | 700*2100 | 1900*1800 | 4300 | 1500 |
| 1.5 | 4400 | 1600 | ||||
| 1.75 | 4500 | 1600 | ||||
| 800 | 1.0 | 1350*1400*2500 | 800*2100 | 2150*2050 | 4400 | 1500 |
| 1.5 | 4500 | 1600 | ||||
| 1.75 | 4600 | 1600 | ||||
| 1000 | 1.0 | 1600*1400*2500 | 900*2100 | 2400*2200 | 4600 | 1600 |
| 1.5 | 4600 | 1650 | ||||
| 1.75 | 4700 | 1700 | ||||
| 1150 | 1.0 | 1400*1800*2500 | 9000*2100 | 2300*2200 | 4600 | 1600 |
| 1.5 | 4600 | 1650 | ||||
| 1.75 | 4700 | 1700 | ||||
| 1350 | 1.0 | 1700*1800*2500 | 1100*2100 | 2700*2400 | 4600 | 1700 |
| 1.5 | 4700 | 1750 | ||||
| 1.75 | 4800 | 1800 | ||||
| 1600 | 1.0 | 1900*1800*2500 | 1100*2100 | 2900*2500 | 4600 | 1700 |
| 1.5 | 4700 | 1750 | ||||
| 1.75 | 4800 | 1800 |
